Hi thank you very much for your patch. But would you update your patch, because there's new version patch from Darron Broad http://dev.kewl.org/hauppauge/v4l-dvb-hg-2007-12-09.diff with very important diseqc-fix. I mean the DCL-fix (dynamic current limit for ISL6421) Also, I can't lock the dvb-s2 channels, only dvb-s channels I can lock goga:/usr/src/szap2# ./szap2 -c 19ee -n2 reading channels from file '19ee' zapping to 2 'CARTOON NET.': sat 0, frequency = 10788 MHz V, symbolrate 22000000, vpid = 0x00a1, apid = 0x0054 sid = 0x7696 (fec = -2147483648, mod = 2) Querying info .. Delivery system=DVB-S using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'Conexant CX24116/CX24118' DVB-S diseqc: sat_no:0 pol_vert:1 hi_band:0 cmd:e0 10 38 f0 wait:0 do_tune: API version=2, delivery system = 0 do_tune: Frequency = 1038000, Srate = 22000000 (DVB-S) do_tune: Frequency = 1038000, Srate = 22000000 (SET_PARAMS) status 1f | signal cac0 | snr e4cd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cac0 | snr e4cd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cac0 | snr e4cd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cac0 | snr e4cd | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal cb40 | snr e4cd | ber 00000000 | unc 00000000 | FE_HAS_LOCK goga:/usr/src/szap2# ./szap2 -c 19 -n1 -t2 -m8 -e2 reading channels from file '19' zapping to 1 'Pro7': sat 0, frequency = 12722 MHz H, symbolrate 22000000, vpid = 0x00ff, apid = 0x0103 sid = 0x27d8 (fec = 32, mod = 8) Querying info .. Delivery system=DVB-S2 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' ----------------------------------> Using 'Conexant CX24116/CX24118' DVB-S diseqc: sat_no:0 pol_vert:0 hi_band:1 cmd:e0 10 38 f3 wait:0 do_tune: API version=2, delivery system = 2 do_tune: Frequency = 2122000, Srate = 22000000 (DVB-S2) do_tune: Frequency = 2122000, Srate = 22000000 (SET_PARAMS) status 01 | signal e740 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal e780 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal e840 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal e740 | snr 0000 | ber 00000000 | unc 00000000 | Igor > > In case you missed the thread in linux-dvb ml, it's under > > http://dev.kewl.org/hvr4000/ (reading it is interesting) and the small > > patch against v4l-dvb : > > http://dev.kewl.org/hvr4000/v4l-dvb-hg-2007-12-06-FIX.diff > I just tried to reunite the old hvr4000-multiproto from this patch and Darrons > current cx24116 frontend driver from http://dev.kewl.org/hauppauge vs. the > current multiproto tree from http://jusst.de/hg/multiproto . The result of > the patch attached below is a hvr4000 multiproto driver that is sufficent to > run a multiproto-patched VDR 1.5.12 . DVB-S2 is not fully working yet, as the > current v4ldvb-alike cx24116 needs some sysctl interaction to switch between > DVB-S and S2. I'm currently not deep enough in the DVB topic to implement the > sysctl things in the correct way, but I think the patch provides a nice > skeletton for further experiments. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
