On Nov 13, 2007 11:16 AM, aldebaran <aldebx@xxxxxxxx> wrote: > > I thank you very much for your quick reply Michel, Markus and Mauro!! [snip] > [ 789.484000] cx23885 driver version 0.0.1 loaded > [ 789.484000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) > -> IRQ 17 > [ 789.484000] CORE cx23885[0]: subsystem: 0070:7717, board: Hauppauge > WinTV-HVR1800lp [card=1,insmod option] > [ 789.584000] cx23885[0]: i2c bus 0 registered > [ 789.584000] cx23885[0]: i2c bus 1 registered > [ 789.584000] cx23885[0]: i2c bus 2 registered > [ 789.612000] tveeprom 0-0050: Hauppauge model 77001, rev D4C0, serial# > 2335707 > [ 789.612000] tveeprom 0-0050: MAC address is 00-0D-FE-23-A3-DB > [ 789.612000] tveeprom 0-0050: tuner model is Xceive XC3028 (idx 120, type > 71) > [ 789.612000] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital > (eeprom 0x88) > [ 789.612000] tveeprom 0-0050: audio processor is CX23885 (idx 39) > [ 789.612000] tveeprom 0-0050: decoder processor is CX23885 (idx 33) > [ 789.612000] tveeprom 0-0050: has no radio, has no IR receiver, has no IR > transmitter > [ 789.612000] cx23885[0]: hauppauge eeprom: model=77001 > [ 789.612000] cx23885[0]: cx23885 based dvb card > [ 789.624000] cx23885[0]: frontend initialization failed > [ 789.624000] cx23885_dvb_register() dvb_register failed err = -1 > [ 789.624000] cx23885_dev_setup() Failed to register dvb adapters on VID_C > [ 789.624000] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 17, > latency: 0, mmio: 0xf4000000 > [ 789.624000] PCI: Setting latency timer of device 0000:04:00.0 to 64 Don't worry about this -- Steve's got it covered: http://linuxtv.org/pipermail/linux-dvb/2007-November/021863.html -mike _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
