Gernot Pansy wrote: > hmm, i see now there are other channels i can't tune to. like this one: > You really have a signal ? The frequency also seems quite a bit high (although still in the spectrum) But the demodulator seems to think that there is no signal at all. Maybe too much attenuation at that frequency due to cable and or other larger capacitive reactance lumped, probably ? (in case such a frequency exists, wild guesses ....) Trying to guess why the demodulator thinks, no signal ... [ 1022.316000] mb86a16_set_fe: freq=2062 Mhz, symbrt=22000 Ksps [ 1022.316000] mb86a16_write: writing to [0x08],Reg[0x32],Data[0x02] [ 1022.316000] mb86a16_write: writing to [0x08],Reg[0x06],Data[0xdf] [ 1022.320000] mantis start feed & dma [ 1022.320000] mb86a16_write: writing to [0x08],Reg[0x0a],Data[0x3d] --- Snip --- [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x25],Data[0x01] [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x2b],Data[0xd4] [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x2c],Data[0x0f] [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x0c],Data[0x04] [ 1022.424000] mb86a16_set_fe: NO -- SIGNAL [ 1022.424000] sync_chk: Status = 00, Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
