On Sunday 14 October 2007 23:40:22 you wrote: > Gernot Pansy wrote: > > hmm, i see now there are other channels i can't tune to. like this one: > > You really have a signal ? The frequency also seems quite a bit high > (although still in the spectrum) But the demodulator seems to think > that there is no signal at all. there have to be a signal, because i never had any troubles to tune to one of these channel with the vp1030 and vp1041. i have to verify, but it seems that these channels have all a low symbol rate. notz > > Maybe too much attenuation at that frequency due to cable and or > other larger capacitive reactance lumped, probably ? (in case such > a frequency exists, wild guesses ....) > > Trying to guess why the demodulator thinks, no signal ... > > > [ 1022.316000] mb86a16_set_fe: freq=2062 Mhz, symbrt=22000 Ksps > [ 1022.316000] mb86a16_write: writing to [0x08],Reg[0x32],Data[0x02] > [ 1022.316000] mb86a16_write: writing to [0x08],Reg[0x06],Data[0xdf] > [ 1022.320000] mantis start feed & dma > [ 1022.320000] mb86a16_write: writing to [0x08],Reg[0x0a],Data[0x3d] > > --- Snip --- > > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x25],Data[0x01] > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x2b],Data[0xd4] > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x2c],Data[0x0f] > [ 1022.416000] mb86a16_write: writing to [0x08],Reg[0x0c],Data[0x04] > [ 1022.424000] mb86a16_set_fe: NO -- SIGNAL > [ 1022.424000] sync_chk: Status = 00, > > > Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
