Manu Abraham wrote: > Artem Makhutov wrote: >> Hi, >> >> On Tue, Oct 02, 2007 at 05:09:59PM +0400, Manu Abraham wrote: >>> Artem Makhutov wrote: >>>> It is possible to tune to DVB-S and DVB-S2 channels. >>>> >>>> The driver has the same issues like the old driver on getting a LOCK >>>> on both DVB-S and DVB-S2 channels. >>> In stb0899_drv.c. where you see SearchRange=3MHz, try increasing it to >>> 10MHz and see whether it makes any difference ? >> I have the feeling that it has improved the situation, but the problem is >> still not solved. > > > Can you please get the log for (with STB0899 and STB6100 with verbose=5) > > a) 3 Mhz > > 1) a complete cycle with a LOCK, including where it calls track. > 2) 3 complete cycles where it fails to LOCK, including where it calls track. > > b) 10 Mhz > > 1) a complete cycle with a LOCK, including where it calls track. > 2) 3 complete cycles where it fails to LOCK, including where it calls track. > > with both DVB-S and DVB-S2 modes, for the same frequency for each. > > Please be careful as not to mix up the logs. > What's up ? Haven't heard after this. Btw, can you do a fresh clone and try again ? Have applied the fixes to the tree, just leave the 3 MHz to 10 MHz Search range change. I have added in a fix, which affects the Timing Recovery Loop, which was wrongly calculated, ie for a different master Clock. Can you please check whether you see any specific change for you in there ? Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
