Artem Makhutov wrote: > Hi, > > On Sat, Sep 29, 2007 at 09:40:55PM +0400, Manu Abraham wrote: >> Artem Makhutov wrote: >>> Hi, >>> >>> with Manu's new drivers I run into this problem with my Technisat >>> Skystar HD: frontend_init: No LNBP21 found! >>> >>> Has someone the same problem? Is the driver working for you? >>> What about the TT3200? Is the driver working? >>> Sep 29 13:40:22 gandalf [ 472.064609] frontend_init: No LNBP21 found! >>> Sep 29 13:40:22 gandalf [ 472.064613] stb0899_release: Release Frontend >>> Sep 29 13:40:22 gandalf [ 472.064616] budget-ci: A frontend driver was not found for device 1131/7146 subsystem 13c2/1019 >>> >> In http://jusst.de/hg/multiproto/file/557067efd932/linux/drivers/media/dvb/ttpci/budget-ci.c >> >> >> 1758 if (lnbp21_attach(budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { >> >> change it to >> >> 1758 if (!lnbp21_attach(budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { > > This fixed the loading problem. > > The modules loads correct (see modprobe.log), but sometimes (very > seldom) it fails to load (see error.log). > > I am also not able to remove the modules (see rmmod.log). > ignore this problem, for now. > Tuning to channes does not work with the original szap (see szap.log.gz). It is not supposed to > It also does not work with the modified one - I am getting a kernel ooops (see ooops.log.gz). Please load the stb6100 module also with verbose=5 so you can do something like this modprobe stb6100 verbose=5 modprobe stb0899 verbose=5 modprobe budget_ci And get the error messages again the same way. Just need the szap and the oops messages. Regards, Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
