Artem Makhutov wrote: > Hi, > > On Tue, Oct 02, 2007 at 03:51:55PM +0400, Manu Abraham wrote: >> Artem Makhutov wrote: >>>> Artem Makhutov wrote: >>>>> On Tue, Oct 02, 2007 at 03:48:38AM +0400, Manu Abraham wrote: >>>>>> Artem Makhutov wrote: >>>>>>> It also does not work with the modified one - I am getting a kernel ooops (see ooops.log.gz). >>>>>> Please load the stb6100 module also with verbose=5 >>>>>> >>>>>> so you can do something like this >>>>>> modprobe stb6100 verbose=5 >>>>>> modprobe stb0899 verbose=5 >>>>>> modprobe budget_ci >>>>>> >>>>>> And get the error messages again the same way. Just need the szap and the oops messages. >>>>> I have attached the new logfiles. >> [...] >> >> In here >> >> http://jusst.de/hg/multiproto/file/557067efd932/linux/drivers/media/dvb/ttpci/budget-ci.c >> >> Change this >> >> 1680struct stb6100_config tt3200_stb6100_config = { >> 1681 .tuner_address = 0x60 >> 1682}; >> >> >> to >> >> struct stb6100_config tt3200_stb6100_config = { >> .tuner_address = 0x60, >> .refclock = 27000000, >> }; >> >> Please check whether it helps .... > > Yeah, it worked. > > It is possible to tune to DVB-S and DVB-S2 channels. > > The driver has the same issues like the old driver on getting a LOCK > on both DVB-S and DVB-S2 channels. In stb0899_drv.c. where you see SearchRange=3MHz, try increasing it to 10MHz and see whether it makes any difference ? Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
