Rainer Schubert schrieb: > >> However i"m a bit confused with the wiki and the different DiB0700 >> <http://www.linuxtv.org/wiki/index.php?title=DiB0700&action=edit> >> Firmwares. I"m using Ubuntu Feisty Fawn and copied the firmware >> http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-03-pre1.fw >> >> into the following folder: /lib/firmware/2.6.20-16-generic/ > > I'd suggest that you locate all the folders named "firmware" on > your system and put a symbolic link there to your firmware file. > > /usr/lib/hotplug/firmware > /lib/firmware > > are the candidates for such a link. > > Give it a try. Good luck! > > Rainer I used the folder mentioned above for the Afatech 9005. And it worked out of the box. So I'm pretty sure there is no need for putting these files in the other folders? Since it has worked before I think, maybe it is the wrong firmware. It would be nice to have a statement from the developer of the firmware. Any other ideas ? Here's what lsusb -v says: Bus 001 Device 007: ID 185b:1e80 Compro Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x185b Compro idProduct 0x1e80 bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 can't get device qualifier: Operation not permitted can't get debug descriptor: Operation not permitted cannot read device status, Operation not permitted (1) Thank you Daniel _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
