Tomi Orava wrote: > Unfortunately I don't have a fix for you, Oh, that's not a real problem - I could always use the original kernel modules. > in case you would be > interested to try a modified version of that driver, here is the patch. > The patch modifies the existing Cinergy T^2 driver to fit into dvb-usb > framework, although it is very experimental in nature (seems to work > quite ok, although no remote controller handling for now). > > I'm very interested to hear if it works/doesn't work for you. > The patch introduces an alternative driver menu option (in addition to > existing one) for cinergy T2 and the module name is dvb-usb-cinergyT2 > instead. Thanks for the patch. I tried it, it _nearly_ works for me. I could watch TV with it, but there was a problem when the module was loaded. Here is an excerpt from /var/log/messages: Sep 18 11:53:40 localhost kernel: [ 267.481812] usb 6-3: new high speed USB device using ehci_hcd and address 4 Sep 18 11:53:41 localhost kernel: [ 267.596538] usb 6-3: configuration #1 chosen from 1 choice Sep 18 11:53:41 localhost kernel: [ 267.680980] Sep 18 11:53:41 localhost kernel: [ 267.681005] Sep 18 11:53:41 localhost kernel: [ 267.681395] dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. Sep 18 11:53:41 localhost kernel: [ 267.681661] cinergyT2: cinergyt2_power_ctrl() setting power=1 Sep 18 11:53:41 localhost kernel: [ 267.681662] Sep 18 11:53:41 localhost kernel: [ 267.685543] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Sep 18 11:53:41 localhost kernel: [ 267.685920] DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver) Sep 18 11:53:41 localhost kernel: [ 267.686318] DVB: registering frontend 0 (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver)... Sep 18 11:53:41 localhost kernel: [ 267.686788] cinergyT2: cinergyt2_power_ctrl() setting power=0 Sep 18 11:53:41 localhost kernel: [ 267.686790] Sep 18 11:53:42 localhost kernel: [ 268.684958] Sep 18 11:53:42 localhost kernel: [ 268.685094] dvb-usb: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver successfully initialized and connected. Sep 18 11:53:42 localhost kernel: [ 268.686056] usbcore: registered new interface driver cinergyT2 Sep 18 11:53:42 localhost kernel: [ 268.701170] kobject_add failed for cinergyT2 with -EEXIST, don't try to register things with the same name in the same directory. Sep 18 11:53:42 localhost kernel: [ 268.701386] [kobject_shadow_add+385/480] kobject_shadow_add+0x181/0x1e0 Sep 18 11:53:42 localhost kernel: [ 268.701493] [kobject_register+33/80] kobject_register+0x21/0x50 Sep 18 11:53:42 localhost kernel: [ 268.701588] [bus_add_driver+111/416] bus_add_driver+0x6f/0x1a0 Sep 18 11:53:42 localhost kernel: [ 268.701688] [pg0+943716016/1069073408] usb_unbind_interface+0x0/0x80 [usbcore] Sep 18 11:53:42 localhost kernel: [ 268.701824] [pg0+943713109/1069073408] usb_register_driver+0x95/0x140 [usbcore] Sep 18 11:53:42 localhost kernel: [ 268.701942] [__link_module+0/32] __link_module+0x0/0x20 Sep 18 11:53:42 localhost kernel: [ 268.702057] [pg0+949792792/1069073408] cinergyt2_init+0x18/0x63 [cinergyT2] Sep 18 11:53:42 localhost kernel: [ 268.702171] [sys_init_module+321/6752] sys_init_module+0x141/0x1a60 Sep 18 11:53:42 localhost kernel: [ 268.702269] [journal_stop+374/528] journal_stop+0x176/0x210 Sep 18 11:53:42 localhost kernel: [ 268.702373] [do_mmap_pgoff+1436/2048] do_mmap_pgoff+0x59c/0x800 Sep 18 11:53:42 localhost kernel: [ 268.702472] [pg0+943682416/1069073408] usb_buffer_alloc+0x0/0x20 [usbcore] Sep 18 11:53:42 localhost kernel: [ 268.702601] [sysenter_past_esp+93/129] sysenter_past_esp+0x5d/0x81 Sep 18 11:53:42 localhost kernel: [ 268.703039] [skb_to_sgvec+512/544] skb_to_sgvec+0x200/0x220 Sep 18 11:53:42 localhost kernel: [ 268.703135] ======================= Before I unplug the device, lsmod shows these entries: Module Size Used by dvb_usb_cinergyT2 8836 0 dvb_usb 21004 1 dvb_usb_cinergyT2 dvb_core 79532 1 dvb_usb After I unplug the device, lsmod shows these entries: Module Size Used by dvb_usb_cinergyT2 8836 4294967295 dvb_usb 21004 1 dvb_usb_cinergyT2 dvb_core 79532 1 dvb_usb Please note the number below "Used by". Now every time I plug it in, that number is constant, but whenever I unplug it, the number is decreased by 1. Nils _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb