af9005-remote not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello list!!

I've written already to post my problems with my af9005 remote control.
I've tested the af9005-lirc module written by Luca and I can't make it work.

For this, I'm trying to get any input from the ir receiver inside input (its work in hasefroch)...

$-:dmesg
dvb-usb: found a 'Afatech DVB-T USB1.1 stick' in cold state, will try to load a firmware
[ 1100.964000] dvb-usb: downloading firmware from file 'af9005.fw'
[ 1101.484000] dvb-usb: found a 'Afatech DVB-T USB1.1 stick' in warm state.
[ 1101.484000] dvb-usb: will use the device's hardware PID filter (table count: 32).
[ 1101.488000] DVB: registering new adapter (Afatech DVB-T USB1.1 stick)
[ 1101.492000] DVB: registering frontend 0 (AF9005 USB DVB-T)...
[ 1101.492000] input: IR-receiver inside an USB DVB receiver as /class/input/input9
[ 1101.492000] dvb-usb: schedule remote query interval to 200 msecs.
[ 1101.492000] dvb-usb: Afatech DVB-T USB1.1 stick successfully initialized and connected.

 As seen, the input device is recognized as /dev/input/input9
 
 i've tried get any string of data using it:
sudo cat /dev/input/event9   - nothing appears as string of data

and with input-events from inputlirc package:

$ sudo input-events 9
/dev/input/event9
   bustype : BUS_USB
   vendor  : 0x15a4
   product : 0x9020
   version : 256
   name    : "IR-receiver inside an USB DVB re"
   phys    : "usb-0000:00: 0c.0-1/ir0"
   bits ev : EV_SYN EV_KEY

waiting for events
timeout, quitting

And nothing gotten

 Any ideas??
 
 This method was not proved with af9005-lirc module from luca, would it work??

thanks in advance!!!


_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux