Hello! I tried for days [or weeks... well] to find a way to use this card [cf topic and bellow] What I tried : - getting latest gentoo kernel : 2.6.22-r5; - getting latest mercurial version for v4l putting all this stuff together gave me some nice results in /dev [/dev/dvb/ appears] and dmesg [see bellow] The I tried with 2 differents programmes : 1- kdetv : error : "unable to grab video" and he tels me to play with v4l2 settings [well.. there are NO settings to play with -.-] Whe I launch it through a term, I have : kdetv: WARNING: V4L2Dev: VIDIOC_QBUF failed: Bad file descriptor or : kdetv: WARNING: V4L2Dev: VIDIOC_DQBUF failed: Inappropriate ioctl for device kdetv: WARNING: V4L2Dev::enqueueBuffer(): broken id: 3057808381 -> Doesn't work.... 2- tvtime : this one do no error... I started a scan, using "television" input.... it found nothing. I'm in "pal" tv mode, "europe" settings for frequences... so I guess it should work. Does anyone of you use this card successfully? Thanks ! some outputs : LSPCI : 00:0b.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) DMESG [partial, before "make reload" in v4l-dvb directory] Linux video capture interface: v2.00 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:00:0b.0, rev: 209, irq: 19, latency: 64, mmio: 0xfae00000 saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected] saa7133[0]: board init: gpio is 600e000 nvidia: module license 'NVIDIA' taints kernel. input: Pinnacle PCTV as /class/input/input5 ir-kbd-i2c: Pinnacle PCTV detected at i2c-0/0-0047/ir0 [saa7133[0]] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f 8e 76 ff ff saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2 saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 38 61 66 saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DMESG [partial, after make reload in v4l-dvb dir] http://paste.geeknode.org/5s0hlc-1839 (as it's a looonngggg piece of...) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
