Hi Paolo, Am Freitag, den 07.09.2007, 10:15 +0200 schrieb Paolo Dell'Aquila: > hermann pitton wrote: > > > Can not reproduce your problem on a 32bit machine with the Asus P7131 > > Dual. If I fake frequencies out of range in my tzap channels.conf, the > > error behavior is OK, also I can still tune to the valid frequencies. > > YEP YEP YEP > > SOLVED!!!!!!!!!!!! > > I want to thank you all. > > Lot of you asked me to check my channels.conf. That is what put me on > the right direction. > > The card was working fine on my WinXP machine so it wasn't an hardware > problem. fine, at least no hardware damage yet. > The reported error was in dmesg so I had only two alternatives: a driver > problem or a buggy software launched at start time. > Damn... a daemon... or a server... > > I checked all my channels.conf: they were right and all the programs > using channels.conf (vdr, tzap, mplayer) were not launched at boot time. > > Mmmmhhhh... MythTv-backend was the only one started in background during > startup... > ... so I removed it and... > > TA-DA > > everything works fine again. > > It's a mystery why Mythtv-backend was trying to use the driver: there > was no scheduled activities... > ... and it's a mystery (for me) why it wasn't possible to use the driver > after that buggy activity. The application developers will see it the other way round. These are buggy drivers. > > Radio doesn't work for you. Are you sure you have still gpio 0x0200000 > > for radio and not 0x0000000 ? > > It wasn't possible to use anything after the mythtv backend activity. > Just noise on radio and jumping images with a lot of noise with anolog tv. > > But now everything is going fine. > > ########## ACTUAL SITUATION ########## > > 1) patched v4l with your patches so dvb-t is binded to the same > analog-tv antenna. (cannot understand why I have to patch also > saa7134-cards.c with gpi=0x0000000 bit I did it, LOL) I told you, if you want to use DVB-T at once with an external s-video or composite input, like from a VCR, you need this not to lose DVB-T. > 2) analog tv: perfect > > 3) Couldn't make the patch cable working. Still have to use aplay or sox > > 4) kaffeine on dvb-t perfect > > 5) mplayer with analog tv: perfect > > 6) mplayer with dvb-t: solved now! It doesn't like all those "auto" in > channels.conf. Changed them and mplayer started working. > > > So the only problem now is with the patch cable. Since I don't have the card and digging into all postings is lost life time, find someone with the same card to confirm the unexpected. > Thanks again to all of you for helping me to solve this problem. > > ciao > > paolo > Have some fun. ciao hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
