This morning I upgraded the kernel of my linux box. After that I cloned v4l-dvb and compiled everything. I've done it because couldn't watch digital tv with mplayer but only with kaffeine. Mplayer error was: vb_streaming_read, attempt N. 6 failed with errno 0 when reading ... So I tried to update bit I didn't solve the problem. Than I've done some test with Mythtv and auto-scanning for channels... and now... ...now I'm having the following (BIG) problem: dvb-t doesn't work anymore (also in kaffeiene or tzap). dmesg has the following error: DVB: frontend 0 frequency 2147483647 out of range (51000000..858000000) After this mess up, analogical TV is no more properly working, before was really perfect. Going crazy... thank you for your help. P.S. I would like to know is some of you could use a patch cable between P7131 and motherboard for listen TV. I've tried sever time but no sound at all and I have to use sox or aplay. Some information about my system: SO: Ubuntu 7.07 - Linux linux 2.6.20-16-generic dmesg: [...] [ 18.020064] saa7130/34: v4l2 driver version 0.2.14 loaded [ 18.020132] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 18.020144] saa7133[0]: found at 0000:01:09.0, rev: 209, irq: 17, latency: 64, mmio: 0xcdcff800 [ 18.020152] saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,autodetected] [ 18.020163] saa7133[0]: board init: gpio is 200000 [ 18.020239] input: saa7134 IR (ASUSTeK P7131 Hybri as /class/input/input4 [ 18.054492] intel_rng: FWH not detected [ 18.148302] nvidia: module license 'NVIDIA' taints kernel. [ 18.155554] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 18.155568] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 18.155581] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff [ 18.155593] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.155605] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff [ 18.155617] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.155630] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.155642] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.562616] tuner 0-004b: chip found @ 0x96 (saa7133[0]) [ 18.610496] tda8290 0-004b: setting tuner address to 61 [ 18.611021] NET: Registered protocol family 17 [ 18.714276] tuner 0-004b: type set to tda8290+75a [ 18.762213] tda8290 0-004b: setting tuner address to 61 [ 18.866006] tuner 0-004b: type set to tda8290+75a [ 18.873190] saa7133[0]: registered device video0 [v4l2] [ 18.873229] saa7133[0]: registered device vbi0 [ 18.873256] saa7133[0]: registered device radio0 [ 18.873732] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.873766] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 18.911272] saa7134 ALSA driver for DMA sound loaded [ 18.911615] saa7133[0]/alsa: saa7133[0] at 0xcdcff800 irq 17 registered as card -2 [ 19.051812] DVB: registering new adapter (saa7133[0]) [ 19.051821] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... [ 19.121478] tda1004x: setting up plls for 48MHz sampling clock [ 19.141824] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 19.141839] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 19.141970] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007 [ 19.404784] tda1004x: found firmware revision 29 -- ok [...] [ 49.092508] tda1004x: setting up plls for 48MHz sampling clock [ 49.455718] tda1004x: found firmware revision 29 -- ok [ 49.796042] DVB: frontend 0 frequency 2147483647 out of range (51000000..858000000) [ 49.834811] DVB: frontend 0 frequency 2147483647 out of range (51000000..858000000) _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
