I'm having a problem with my Kworld ATSC-110's NTSC cable interface (/dev/video0) not locking on any signal. I just upgraded v4l from linux kernel 2.6.22.4 modules -> current v4l-dvb kernel modules (v4l-dvb-0c3e99a3f31c). This was suggested by Mike Krufky to fix the rf input switching I was noticing with the 2.6.22.4 kernel. The DVB interface is working perfectly on the lower port. I patched the v4l code to add the Kworld remote. My system: Asus Pendant P1-AH2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ 1 GB RAM Kworld ATSC-110 WinTV-PVR 250 Ubuntu 7.10 Linux 2.6.22-10-generic #1 SMP Wed Aug 22 07:42:05 GMT 2007 x86_64 GNU/Linux What I have tried: I have tried scanning with MythTV and TVTime, no channels are found. The dev interface (/dev/video0) is being created and logged in dmesg and working. Prevented the saa7134-dvb module from loading, to make sure that the card wasn't being accessed by both turners at once. Thank you for any help. Nathan. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
