Re: Kworld ATSC-110 : No NTSC Cable Signal

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Nathan Faust wrote:
> I'm having a problem with my Kworld ATSC-110's NTSC cable interface
> (/dev/video0) not locking on any signal.  I just upgraded v4l from linux
> kernel 2.6.22.4 modules -> current v4l-dvb kernel modules
> (v4l-dvb-0c3e99a3f31c).  This was suggested by Mike Krufky to fix the rf
> input switching I was noticing with the 2.6.22.4 kernel.  The DVB
> interface is working perfectly on the lower port. 

You were trying to pull the NTSC cable signal in from the lower RF
input, correct?

Regardless of what RF input you currently have it attached to, did you
attempt the same by switching to the other RF input? Try that too and
see what happens.



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux