Hi On Friday 31 August 2007 11:53, Markus Rechberger wrote: > Hi, > > On 8/31/07, mimo <mimo@xxxxxxxxxxx> wrote: > > Hi > > > > so I have patched my kernel and compiled qemu with pciproxy patches. I've > > put > > the commands I've used on the linux tv wiki > > http://linuxtv.org/v4lwiki/index.php/Qemu > > did you ever read: > http://mcentral.de/wiki/index.php/QemuPciproxy Yes I did but the hg grabbed the v4l sources > > I am not sure how many pci functions your device has, as far as I > remember it should only have one if I'm not wrong. > Although I don't remember if there's an mt352 dvb demodulator used. > A patch got submitted for the Avermedia M115 to get DVB work too, I'll > commit it within the next few hours.. this might also enable dvb > support for your device. You mean this I guess: http://mcentral.de/hg/~mrec/v4l-dvb-experimental/rev/4baa775da967 I don't understand the v4l code at all but this adds support for mt352 on the 115 as far as a i can tell -- what's needed to also support it on the e506r ? should i try to duplicate structures/code for e506 and see what happens? Cheers! mimo > > Markus > > > And then, finally, after days of compiling, patching, downloading, etc > > this is > > what happened: > > > > sudo qemu -hda /data/tmp/winxp.img -pciproxy 02:07.0 > > Password: > > Warning: No DNS servers found > > Could not open '/dev/qvm86' - QEMU acceleration layer not activated > > Adding PCI Host Proxy device: 02:07:0 > > 02:07.0: Host device can't be allowed to share an IRQ yet, sorry, > > interrupts disabled. > > > > after I re-insert the wlan card lspci shows > > > > 00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev > > 02) > > 00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev > > 02) 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) > > (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub > > #2) (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI > > Bridge (rev 41) 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge > > (LPC) (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 > > (rev 01) 00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller > > (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation > > 82801CA/CAM AC'97 Audio > > Controller (rev 01) > > 00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev > > 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon > > Mobility M6 LY > > 02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A > > IEEE-1394a-2000 Controller (PHY/Link) > > 02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > 02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 88) > > 02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 88) > > 02:07.2 System peripheral: Ricoh Co Ltd R5C576 SD Bus Host Adapter > > 03:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 > > Video Broadcast Decoder (rev d1) > > 07:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g > > Wireless LAN Controller (rev 03) > > > > hmmm...... > > > > On Monday 28 May 2007 23:04:44 mimo wrote: > > > Hi Markus > > > > > > > > > I had a look at qemu and the pci proxy stuff. Is there any point in me > > > trying to get that to work and dump something that would be useful? We > > > have DVB-T here but I think there might be issues as the card is on a > > > shared IRQ but I could probably just unplug the wireless card while I'm > > > dumping info. Let me know if that would be of any help - maybe there's > > > stuff I could figure out myself but I don't have any experience with > > > this stuff just can read/write C that's all! > > > > > > Thanks, > > > > > > mimo > > > > > > > On 5/27/07, mimo <mimo@xxxxxxxxxxx> wrote: > > > >> Hi > > > >> > > > >> I have had some success and failure with this card - it identifies > > > >> as 1131:7133 using latest mercurial stuff. > > > >> I have added > > > >> options saa7134 card=117 alsa=1 > > > >> install saa7134 /sbin/modprobe xc3028-tuner; /sbin/modprobe > > > >> --ignore-install > > > >> saa7134; /sbin/modprobe saa7134-dvb; /sbin/modprobe saa7134-alsa > > > >> > > > >> Using firmware_pinnacle.tgz the whole analog part of the card works > > > >> (kernel > > > >> 2.6.20-lowlatency from ubuntu). > > > >> > > > >> Below is my dmsg. The audio works with the sox workaround. DVB-T > > > >> doesn't. I > > > >> also tried card=85 > > > >> (http://www.linuxtv.org/pipermail/linux-dvb/2006-May/010246.html) > > > >> but that > > > >> reported problems. > > > >> > > > >> What are the chances of getting dvb-t working and can I help in some > > > >> way? > > > > > > > > the chances are 50:50, I guess there are just some very small changes > > > > missing to get DVB-T work properly. Since I do not have that device I > > > > cannot do anything and someone else has to figure out the outstanding > > > > part. > > > > > > > > Maybe someone who owns that device in Berlin/Leipzig/(Dresden would > > > > be fine in around 1 month when they start to broadcast DVB-T) can > > > > contact me > > > > I cannot guarantee that I can get it work, chances aren't too bad > > > > since I got analogue TV (including audio) and radio already work. > > > > > > > > Markus > > > > > > > >> Thanks, > > > >> > > > >> mm > > > >> > > > >> [12987.596000] pccard: CardBus card inserted into slot 0 > > > >> [12987.767000] saa7130/34: v4l2 driver version 0.2.14 loaded > > > >> [12987.769000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) > > > >> [12987.769000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> > > > > GSI > > > > > >> 11 > > > >> (level, low) -> IRQ 11 > > > >> [12987.770000] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 11, > > > >> latency: > > > >> 0, mmio: 0x3c000000 > > > >> [12987.770000] PCI: Setting latency timer of device 0000:03:00.0 to > > > >> 64 [12987.770000] saa7133[0]: subsystem: 1461:f436, board: AVerMedia > > > >> Cardbus > > > >> TV/Radio (E506R) [card=117,insmod option] > > > >> [12987.770000] saa7133[0]: board init: gpio is 2220000 > > > >> [12987.897000] saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 > > > >> 00 00 > > > >> 00 > > > >> 00 00 00 00 > > > >> [12987.897000] saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff > > > >> ff ff > > > >> ff > > > >> ff ff ff ff > > > >> [12987.897000] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 > > > >> ff 00 > > > >> ff > > > >> ff ff ff ff > > > >> [12987.898000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > > > >> ff ff > > > >> ff > > > >> ff ff ff ff > > > >> [12987.898000] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff > > > >> ff ff > > > >> ff > > > >> ff ff ff ff > > > >> [12987.899000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > > > >> ff ff > > > >> ff > > > >> ff ff ff ff > > > >> [12987.899000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff > > > >> ff ff > > > >> ff > > > >> ff ff ff ff > > > >> [12987.899000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff > > > >> ff ff > > > >> ff > > > >> ff ff ff ff > > > >> [12988.002000] tuner 0-0061: chip found @ 0xc2 (saa7133[0]) > > > >> [12988.002000] > > > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > > > >> setting tuner callback > > > >> [12988.002000] tuner 0x61: Configuration acknowledged > > > >> [12988.002000] > > > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > > > >> setting tuner callback > > > >> [12988.002000] tuner 0x61: Configuration acknowledged > > > >> [12988.002000] > > > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > > > >> setting tuner callback > > > >> [12988.049000] > > > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/xc3028-tuner.c: > > > >> attach request! > > > >> [12988.049000] > > > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > > > >> xc3028 tuner successfully loaded > > > >> [12988.074000] saa7133[0]: registered device video0 [v4l2] > > > >> [12988.075000] saa7133[0]: registered device vbi0 > > > >> [12988.075000] saa7133[0]: registered device radio0 > > > >> [12988.080000] saa7134 ALSA driver for DMA sound loaded > > > >> [12988.080000] saa7133[0]/alsa: saa7133[0] at 0x3c000000 irq 11 > > > >> registered > > > >> as > > > >> card -1 > > > >> > > > >> _______________________________________________ > > > >> linux-dvb mailing list > > > >> linux-dvb@xxxxxxxxxxx > > > >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > > > > -- > > > > Markus Rechberger > > > > > > _______________________________________________ > > > linux-dvb mailing list > > > linux-dvb@xxxxxxxxxxx > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > _______________________________________________ > > linux-dvb mailing list > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
