Hi so I have patched my kernel and compiled qemu with pciproxy patches. I've put the commands I've used on the linux tv wiki http://linuxtv.org/v4lwiki/index.php/Qemu And then, finally, after days of compiling, patching, downloading, etc this is what happened: sudo qemu -hda /data/tmp/winxp.img -pciproxy 02:07.0 Password: Warning: No DNS servers found Could not open '/dev/qvm86' - QEMU acceleration layer not activated Adding PCI Host Proxy device: 02:07:0 02:07.0: Host device can't be allowed to share an IRQ yet, sorry, interrupts disabled. after I re-insert the wlan card lspci shows 00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02) 00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41) 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 01) 00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY 02:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:07.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 88) 02:07.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 88) 02:07.2 System peripheral: Ricoh Co Ltd R5C576 SD Bus Host Adapter 03:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 07:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) hmmm...... On Monday 28 May 2007 23:04:44 mimo wrote: > Hi Markus > > > I had a look at qemu and the pci proxy stuff. Is there any point in me > trying to get that to work and dump something that would be useful? We > have DVB-T here but I think there might be issues as the card is on a > shared IRQ but I could probably just unplug the wireless card while I'm > dumping info. Let me know if that would be of any help - maybe there's > stuff I could figure out myself but I don't have any experience with this > stuff just can read/write C that's all! > > Thanks, > > mimo > > > On 5/27/07, mimo <mimo@xxxxxxxxxxx> wrote: > >> Hi > >> > >> I have had some success and failure with this card - it identifies as > >> 1131:7133 using latest mercurial stuff. > >> I have added > >> options saa7134 card=117 alsa=1 > >> install saa7134 /sbin/modprobe xc3028-tuner; /sbin/modprobe > >> --ignore-install > >> saa7134; /sbin/modprobe saa7134-dvb; /sbin/modprobe saa7134-alsa > >> > >> Using firmware_pinnacle.tgz the whole analog part of the card works > >> (kernel > >> 2.6.20-lowlatency from ubuntu). > >> > >> Below is my dmsg. The audio works with the sox workaround. DVB-T > >> doesn't. I > >> also tried card=85 > >> (http://www.linuxtv.org/pipermail/linux-dvb/2006-May/010246.html) but > >> that > >> reported problems. > >> > >> What are the chances of getting dvb-t working and can I help in some > >> way? > > > > the chances are 50:50, I guess there are just some very small changes > > missing to get DVB-T work properly. Since I do not have that device I > > cannot do anything and someone else has to figure out the outstanding > > part. > > > > Maybe someone who owns that device in Berlin/Leipzig/(Dresden would be > > fine in around 1 month when they start to broadcast DVB-T) can contact > > me > > I cannot guarantee that I can get it work, chances aren't too bad > > since I got analogue TV (including audio) and radio already work. > > > > Markus > > > >> Thanks, > >> > >> mm > >> > >> [12987.596000] pccard: CardBus card inserted into slot 0 > >> [12987.767000] saa7130/34: v4l2 driver version 0.2.14 loaded > >> [12987.769000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002) > >> [12987.769000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI > >> 11 > >> (level, low) -> IRQ 11 > >> [12987.770000] saa7133[0]: found at 0000:03:00.0, rev: 209, irq: 11, > >> latency: > >> 0, mmio: 0x3c000000 > >> [12987.770000] PCI: Setting latency timer of device 0000:03:00.0 to 64 > >> [12987.770000] saa7133[0]: subsystem: 1461:f436, board: AVerMedia > >> Cardbus > >> TV/Radio (E506R) [card=117,insmod option] > >> [12987.770000] saa7133[0]: board init: gpio is 2220000 > >> [12987.897000] saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 > >> 00 > >> 00 > >> 00 00 00 00 > >> [12987.897000] saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff > >> ff > >> ff > >> ff ff ff ff > >> [12987.897000] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff > >> 00 > >> ff > >> ff ff ff ff > >> [12987.898000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff > >> ff > >> ff > >> ff ff ff ff > >> [12987.898000] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff > >> ff > >> ff > >> ff ff ff ff > >> [12987.899000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff > >> ff > >> ff > >> ff ff ff ff > >> [12987.899000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff > >> ff > >> ff > >> ff ff ff ff > >> [12987.899000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff > >> ff > >> ff > >> ff ff ff ff > >> [12988.002000] tuner 0-0061: chip found @ 0xc2 (saa7133[0]) > >> [12988.002000] > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > >> setting tuner callback > >> [12988.002000] tuner 0x61: Configuration acknowledged > >> [12988.002000] > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > >> setting tuner callback > >> [12988.002000] tuner 0x61: Configuration acknowledged > >> [12988.002000] > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > >> setting tuner callback > >> [12988.049000] > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/xc3028-tuner.c: > >> attach request! > >> [12988.049000] > >> /home/mimo/e506/v4l-dvb-experimental-20070523/v4l/tuner-core.c: > >> xc3028 tuner successfully loaded > >> [12988.074000] saa7133[0]: registered device video0 [v4l2] > >> [12988.075000] saa7133[0]: registered device vbi0 > >> [12988.075000] saa7133[0]: registered device radio0 > >> [12988.080000] saa7134 ALSA driver for DMA sound loaded > >> [12988.080000] saa7133[0]/alsa: saa7133[0] at 0x3c000000 irq 11 > >> registered > >> as > >> card -1 > >> > >> _______________________________________________ > >> linux-dvb mailing list > >> linux-dvb@xxxxxxxxxxx > >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > -- > > Markus Rechberger > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
