Hi! Nice to know that I am not the only one in the world having such issues :-) In the meantime I have done some logging to track the problem down. Logging for DST.C is enabled via: modprobe dst verbose=4 I have also enabled i2c debugging in the kernel. Here are the relevant Parts of the log where the failure becomes visible: Athlon X2 with SMP disabled: firt time szap to Astra channel working: <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 3 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=10 <3>dst(0) read_dst: reply is 0x9 <4> 0x0 0x4 0xd4 0x18 0xa7 0x0 0x57 0x1 0x8 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 05 00 00 00 00 00 fb ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 2 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x4 szap from Hotbird back to Astra channel NOT working anymore: <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait NOT ready after 200 <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] Here we can see that the driver is trying to tune the requested frequency and times out with dst_wait_dst_ready. However without knowing what all the commands sent to the DST are, it seems impossible to me to track the problem further down. Someone must have more documentation around the DST? Maybe he will share knowledge? As far as I understand the DISEQC commands have been send to the Twinhan. I will try to see if there is some possibility to see if the DISEQC commands are actually send out to the physical wire?! I think however this will need dome digital storage scope which I don't own (yet)... Best Regards, Manuel -----Original Message----- From: Remy Bohmer [mailto:l.pinguin@xxxxxxxxx] Sent: Dienstag, 17. Juli 2007 18:36 To: Manuel Kampert Cc: linux-dvb@xxxxxxxxxxx Subject: Re: Twinhan VP-1030C Diseq problem Hello Manuel, > Tuning different channels on the Astra system is no problem. Also switching > to Hotbird Is working fine. If I try to switch back from Hotbird to Astra this is not > working anymore > The card tries to tune the frequency but does not change the LNB. Exactly the same problem here! I have no solution yet. My system contains a Core2Duo E6600 2.4GHz core, and I have a Skystar 1 CI v3.0 card, which is a clone of the card you mention. I run MythTV. Could it be timing related? I also want to help debugging this problem. Kind Regards, Remy Böhmer
<3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff b6 01 00 00 41 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 1 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff b6 01 00 00 41 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 1 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 <3>dst(0) dst_set_diseqc: DiseqC paket=[0] [8] [4] [e0] [10] [38] [f3] [d9] <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 08 04 e0 10 38 f3 d9 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 14 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x8 0x4 0xe0 0x10 0x38 0xf3 0xd9 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff 02 01 00 00 f5 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 4 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0x2 0x1 0x0 0x0 0xf5 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 02 02 01 00 00 f2 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 2 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0x2 0x2 0x1 0x0 0x0 0xf2 <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait NOT ready after 200 <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) write_dst: RDC 8820 RESET <3>dst(0) dst_error_bailout: Trying to bailout from previous error. <3>dst(0) rdc_8820_reset: Resetting DST <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_write_tuna: write not successful <3>dst(0) dst_set_freq: set Frequency 1237718 <3>dst(0) dst_set_frontend: Set Frequency=[1237718] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d5 01 00 6b 6c 40 06 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait NOT ready after 200 <3>dst(0) dst_set_freq: set Frequency 1237718 <3>dst(0) dst_set_frontend: Set Frequency=[1237718] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d5 01 00 6b 6c 40 06 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) write_dst: _write_dst error (err == -5, len == 0x0a, b0 == 0x09) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) write_dst: RDC 8820 RESET <3>dst(0) dst_error_bailout: Trying to bailout from previous error. <3>dst(0) rdc_8820_reset: Resetting DST <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_write_tuna: write not successful <3>dst(0) dst_set_freq: set Frequency 1234282 <3>dst(0) dst_set_frontend: Set Frequency=[1234282] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d2 01 00 6b 6c 40 09 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 39 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=10 <3>dst(0) read_dst: reply is 0x9 <4> 0x0 0x4 0xd2 0x1f 0x37 0x0 0x4c 0x1 0x7e
<3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff b6 01 00 00 41 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 1 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff b6 01 00 00 41 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 1 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0xb6 0x1 0x0 0x0 0x41 <3>dst(0) dst_set_diseqc: DiseqC paket=[0] [8] [4] [e0] [10] [38] [f3] [d9] <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 08 04 e0 10 38 f3 d9 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 14 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x8 0x4 0xe0 0x10 0x38 0xf3 0xd9 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 ff 02 01 00 00 f5 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 4 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0xff 0x2 0x1 0x0 0x0 0xf5 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 09 02 02 01 00 00 f2 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 2 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x0 <4> 0x9 0x2 0x2 0x1 0x0 0x0 0xf2 <3>dst(0) dst_set_freq: set Frequency 1236000 <3>dst(0) dst_set_frontend: Set Frequency=[1236000] <3>dst(0) dst_set_symbolrate: set symrate 27500000 <3>dst(0) dst_set_polarization: Polarization=[Horizontal] <3>dst(0) dst_set_frontend: Set Symbolrate=[27500000] <3>dst(0) dst_write_tuna: type_flags 0x1151 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 09 00 04 d4 01 00 6b 6c 40 07 ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=10 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 3 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=10 <3>dst(0) read_dst: reply is 0x9 <4> 0x0 0x4 0xd4 0x18 0xa7 0x0 0x57 0x1 0x8 <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 05 00 00 00 00 00 fb ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 2 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: reply is 0x4 <4> 0xd4 0x18 0x89 0x0 0x57 0x1 0x2f <3>dst(0) dst_comm_init: Initializing DST. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) rdc_reset_state: Resetting state machine <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] <4>writing [ 00 05 00 00 00 00 00 fb ] <7>i2c_adapter i2c-0: master_xfer[0] W, addr=0x55, len=8 <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=1 <3>dst(0) read_dst: reply is 0xff <3>dst(0) dst_wait_dst_ready: dst wait ready after 2 <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x04) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x55, len=8 <3>dst(0) read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00) <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] <3>dst(0) read_dst: RDC 8820 RESET <3>dst(0) dst_error_bailout: Trying to bailout from previous error. <3>dst(0) rdc_8820_reset: Resetting DST <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_command: Trying to recover.. <3>dst(0) dst_error_recovery: Trying to return from previous errors. <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] <3>dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
