Hi Zenon Mousmoulas schrieb: > Hartmut Hackmann @ Tuesday, June 19, 2007 12:09 AM: >> I will attach a modified version of the patch posted by >> Thomas Unverzagt. It should >> apply to the current repository. >> Please test it and report. > > Hi, > > I just applied the patch to tda10086.c from the current snapshot (changeset: 5767:76b92a337aec) and installed, successfully. > > saa7130/34: v4l2 driver version 0.2.14 loaded > saa7133[0]: found at 0000:06:01.0, rev: 209, irq: 74, latency: 32, mmio: 0xfc402000 > saa7133[0]: subsystem: 5168:0319, board: LifeView FlyDVB Trio [card=84,autodetected] > saa7133[0]: board init: gpio is 211400 > tuner 2-004b: chip found @ 0x96 (saa7133[0]) > tuner 2-004b: setting tuner address to 61 > tuner 2-004b: type set to tda8290+75a > saa7133[0]: i2c eeprom 00: 68 51 19 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7133[0]: i2c eeprom 10: 00 00 60 0a ff 20 ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 f9 ff ff ff ff > saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 40: ff 00 10 c0 96 12 08 00 c2 96 c6 1c 16 3a 15 ff > saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7133[0]: i2c scan: found device @ 0x10 [???] > saa7133[0]: i2c scan: found device @ 0x12 [???] > saa7133[0]: i2c scan: found device @ 0x1c [???] > saa7133[0]: i2c scan: found device @ 0x96 [???] > saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] > saa7133[0]: registered device video1 [v4l2] > saa7133[0]: registered device vbi1 > saa7133[0]: registered device radio0 > DVB: registering new adapter (saa7133[0]) > DVB: registering frontend 0 (Philips TDA10086 DVB-S)... > saa7134 ALSA driver for DMA sound loaded > saa7133[0]/alsa: saa7133[0] at 0xfc402000 irq 74 registered as card -1 > > Diseqc works. I scanned and tuned on all 4 satellites. > I'd say femon actually shows better readings now, but I'm not sure how I tuned before the upgrade. > > In any case, thanks! :) > Great!!! Looks like we are close to the goal now. If you used an older version, reception indeed should be better now. The values for signal and S/N were just wrong in the old version. > Please let me know if I can provide any more specific feedback. I'll keep you posted if I see anything odd. > > Best regards, > Z. > That's sufficient for the time being. I need to check whether this pach is valid for all combinations of chips. Best regards Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
