> It should be possible. > Tuner and channel decoder are supported (though there is a problem with > the DISEQc i need to cross check). > But i will need additional information: > What is the type of the LNB controller? > This an additional chip on the board, possibly in a small package sitting close > to an inductor. > (might be ISl64xx) To give you all information I can get from the PCB: adhesive on the metal cage left: 2005/36 SV20 3112 297 13801 SD1878/SHA small controller chip mid/top: Philips logo TDA10086HT SA7423.1 35 ZSG05322 big controller chip mid/bottom: Philips logo SAA7134HL CE3155 13 TSG05151 very small LNB controller chip right: ISL 6405ER H527BB Printed on the PCB: CTX929_V2 05242005 Adhesive on the backside: MEDION Type: SAT-TUNER 7134 Rev: CTX929_V.1 DVB-S P/N: 20029268 There's no typo: The revision number given on the board is CTX929_V2, the one given on the adhesive is CTX929_V.1. Hope this helps and thanks for your help! _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
