I recently purchased a Genius TVGo DVB-T02Q, a usb dvb-t device
i found in this mail list that this device belongs to the m920x family. The
windows INF file makes reference to the m9207 chip, as frontends, someone
pointed out in this mail list that it has got inside a Zarlink ZL10353 and
MT2060 chipsets, the windows INF file also makes reference to QT1010 and
MT352...
I took a patch i also located in this mail list, but had to modify it a bit to
make it up-to-date with the current mercury m920x branch of the v4l-dvb
project,... after modification i applied this patch to m920.c file, i send
attached the modified m920.c file.
As a result i found out that the device is recognised by the system, as stated
in the dmesg output:
[ 125.352000] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 125.496000] usb 2-3: configuration #1 chosen from 1 choice
[ 125.700000] dvb-usb: found a 'Genius TVGo DVB-T02Q' in cold state, will try
to load a firmware
[ 125.808000] dvb-usb: downloading firmware from file 'dvb-usb-t02q-02.fw'
[ 125.812000] usbcore: registered new interface driver dvb_usb_m920x
but the device did not work and the frontends were not loaded, here you are
the related modules automatically loaded when the usb device is connected.
Module Size Used by
dvb_usb_m920x 20484 0
dvb_usb 24972 1 dvb_usb_m920x
dvb_core 80808 1 dvb_usb
dvb_pll 15620 1 dvb_usb
I think the patch only gets the device recognized but is not configured
properly to detect and load the frontends... if I unplug the devive the
modules won't be removed
I'm wokring witha a 2.6.20-15 kernel in a kubuntu system.
I'm willing to make this device work and help in the m920x branch, i'm quite
newbie in programming and then i will need some indications on how to debuge
to get more output from the code or how to try to 'communicate' with the
device (send it stuff and see what comes back).
If anyone else has got some experience with this device, every comment,
suggestion are very wellcome (appart of giving it back and buy a new
one ;)... i'm very stubborn and won't stop trying untill i get this one
working)
cheers,
Pere Blay
/* DVB USB compliant linux driver for MSI Mega Sky 580 DVB-T USB2.0 receiver
*
* Copyright (C) 2006 Aapo Tahkola (aet@xxxxxxxxxxxxxx)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
#include "m920x.h"
#include "mt352.h"
#include "mt352_priv.h"
#include "zl10353.h"
#include "qt1010.h"
#include "mt2060.h"
#include "tda1004x.h"
#include "tda827x.h"
/* debug */
static int dvb_usb_m920x_debug;
module_param_named(debug,dvb_usb_m920x_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid);
static inline int m920x_read(struct usb_device *udev, u8 request, u16 value,
u16 index, void *data, int size)
{
int ret;
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
request, USB_TYPE_VENDOR | USB_DIR_IN,
value, index, data, size, 2000);
if (ret < 0) {
printk(KERN_INFO "m920x_read = error: %d\n", ret);
return ret;
}
if (ret != size) {
deb("m920x_read = no data\n");
return -EIO;
}
return 0;
}
static inline int m920x_write(struct usb_device *udev, u8 request,
u16 value, u16 index)
{
int ret;
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
request, USB_TYPE_VENDOR | USB_DIR_OUT,
value, index, NULL, 0, 2000);
return ret;
}
static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq)
{
int ret = 0, i, epi, flags = 0;
int adap_enabled[M9206_MAX_ADAPTERS] = { 0 };
/* Remote controller init. */
if (d->props.rc_query) {
deb("Initialising remote control\n");
while (rc_seq->address) {
if ((ret = m920x_write(d->udev, M9206_CORE,
rc_seq->data,
rc_seq->address)) != 0) {
deb("Initialising remote control failed\n");
return ret;
}
rc_seq++;
}
deb("Initialising remote control success\n");
}
for (i = 0; i < d->props.num_adapters; i++)
flags |= d->adapter[i].props.caps;
/* Some devices(Dposh) might crash if we attempt touch at all. */
if (flags & DVB_USB_ADAP_HAS_PID_FILTER) {
for (i = 0; i < d->props.num_adapters; i++) {
epi = d->adapter[i].props.stream.endpoint - 0x81;
if (epi < 0 || epi >= M9206_MAX_ADAPTERS) {
printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n");
return -EINVAL;
}
adap_enabled[epi] = 1;
}
for (i = 0; i < M9206_MAX_ADAPTERS; i++) {
if (adap_enabled[i])
continue;
if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x0)) != 0)
return ret;
if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x02f5)) != 0)
return ret;
}
}
return ret;
}
static int m920x_init_ep(struct usb_interface *intf)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_host_interface *alt;
if ((alt = usb_altnum_to_altsetting(intf, 1)) == NULL) {
deb("No alt found!\n");
return -ENODEV;
}
return usb_set_interface(udev, alt->desc.bInterfaceNumber,
alt->desc.bAlternateSetting);
}
static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
struct m920x_state *m = d->priv;
int i, ret = 0;
u8 rc_state[2];
if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
goto unlock;
if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
goto unlock;
for (i = 0; i < d->props.rc_key_map_size; i++)
if (d->props.rc_key_map[i].data == rc_state[1]) {
*event = d->props.rc_key_map[i].event;
switch(rc_state[0]) {
case 0x80:
*state = REMOTE_NO_KEY_PRESSED;
goto unlock;
case 0x88: /* framing error or "invalid code" */
case 0x99:
case 0xc0:
case 0xd8:
*state = REMOTE_NO_KEY_PRESSED;
m->rep_count = 0;
goto unlock;
case 0x93:
case 0x92:
m->rep_count = 0;
*state = REMOTE_KEY_PRESSED;
goto unlock;
case 0x91:
/* prevent immediate auto-repeat */
if (++m->rep_count > 2)
*state = REMOTE_KEY_REPEAT;
else
*state = REMOTE_NO_KEY_PRESSED;
goto unlock;
default:
deb("Unexpected rc state %02x\n", rc_state[0]);
*state = REMOTE_NO_KEY_PRESSED;
goto unlock;
}
}
if (rc_state[1] != 0)
deb("Unknown rc key %02x\n", rc_state[1]);
*state = REMOTE_NO_KEY_PRESSED;
unlock:
return ret;
}
/* I2C */
static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int i, j;
int ret = 0;
if (!num)
return -EINVAL;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
for (i = 0; i < num; i++) {
if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) {
/* For a 0 byte message, I think sending the address
* to index 0x80|0x40 would be the correct thing to
* do. However, zero byte messages are only used for
* probing, and since we don't know how to get the
* slave's ack, we can't probe. */
ret = -ENOTSUPP;
goto unlock;
}
/* Send START & address/RW bit */
if (!(msg[i].flags & I2C_M_NOSTART)) {
if ((ret = m920x_write(d->udev, M9206_I2C,
(msg[i].addr << 1) |
(msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0)
goto unlock;
/* Should check for ack here, if we knew how. */
}
if (msg[i].flags & I2C_M_RD) {
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction?
* Send STOP, otherwise send ACK. */
int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01;
if ((ret = m920x_read(d->udev, M9206_I2C, 0x0,
0x20 | stop,
&msg[i].buf[j], 1)) != 0)
goto unlock;
}
} else {
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction? Then send STOP. */
int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00;
if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
goto unlock;
/* Should check for ack here too. */
}
}
}
ret = num;
unlock:
mutex_unlock(&d->i2c_mutex);
return ret;
}
static u32 m920x_i2c_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C;
}
static struct i2c_algorithm m920x_i2c_algo = {
.master_xfer = m920x_i2c_xfer,
.functionality = m920x_i2c_func,
};
/* pid filter */
static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid)
{
int ret = 0;
if (pid >= 0x8000)
return -EINVAL;
pid |= 0x8000;
if ((ret = m920x_write(d->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
return ret;
if ((ret = m920x_write(d->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
return ret;
return ret;
}
static int m920x_update_filters(struct dvb_usb_adapter *adap)
{
struct m920x_state *m = adap->dev->priv;
int enabled = m->filtering_enabled[adap->id];
int i, ret = 0, filter = 0;
int ep = adap->props.stream.endpoint;
for (i = 0; i < M9206_MAX_FILTERS; i++)
if (m->filters[adap->id][i] == 8192)
enabled = 0;
/* Disable all filters */
if ((ret = m920x_set_filter(adap->dev, ep, 1, enabled)) != 0)
return ret;
for (i = 0; i < M9206_MAX_FILTERS; i++)
if ((ret = m920x_set_filter(adap->dev, ep, i + 2, 0)) != 0)
return ret;
/* Set */
if (enabled) {
for (i = 0; i < M9206_MAX_FILTERS; i++) {
if (m->filters[adap->id][i] == 0)
continue;
if ((ret = m920x_set_filter(adap->dev, ep, filter + 2, m->filters[adap->id][i])) != 0)
return ret;
filter++;
}
}
return ret;
}
static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
struct m920x_state *m = adap->dev->priv;
m->filtering_enabled[adap->id] = onoff ? 1 : 0;
return m920x_update_filters(adap);
}
static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff)
{
struct m920x_state *m = adap->dev->priv;
m->filters[adap->id][index] = onoff ? pid : 0;
return m920x_update_filters(adap);
}
static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw)
{
u16 value, index, size;
u8 read[4], *buff;
int i, pass, ret = 0;
buff = kmalloc(65536, GFP_KERNEL);
if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
goto done;
deb("%x %x %x %x\n", read[0], read[1], read[2], read[3]);
if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0)
goto done;
deb("%x\n", read[0]);
for (pass = 0; pass < 2; pass++) {
for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
value = le16_to_cpu(*(u16 *)(fw->data + i));
i += sizeof(u16);
index = le16_to_cpu(*(u16 *)(fw->data + i));
i += sizeof(u16);
size = le16_to_cpu(*(u16 *)(fw->data + i));
i += sizeof(u16);
if (pass == 1) {
/* Will stall if using fw->data ... */
memcpy(buff, fw->data + i, size);
ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
M9206_FW,
USB_TYPE_VENDOR | USB_DIR_OUT,
value, index, buff, size, 20);
if (ret != size) {
deb("error while uploading fw!\n");
ret = -EIO;
goto done;
}
msleep(3);
}
i += size;
}
if (i != fw->size) {
deb("bad firmware file!\n");
ret = -EINVAL;
goto done;
}
}
msleep(36);
/* m920x will disconnect itself from the bus after this. */
(void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
deb("firmware uploaded!\n");
done:
kfree(buff);
return ret;
}
/* Callbacks for DVB USB */
static int m920x_identify_state(struct usb_device *udev,
struct dvb_usb_device_properties *props,
struct dvb_usb_device_description **desc,
int *cold)
{
struct usb_host_interface *alt;
alt = usb_altnum_to_altsetting(usb_ifnum_to_if(udev, 0), 1);
*cold = (alt == NULL) ? 1 : 0;
return 0;
}
/* demod configurations */
static int m920x_mt352_demod_init(struct dvb_frontend *fe)
{
int ret;
u8 config[] = { CONFIG, 0x3d };
u8 clock[] = { CLOCK_CTL, 0x30 };
u8 reset[] = { RESET, 0x80 };
u8 adc_ctl[] = { ADC_CTL_1, 0x40 };
u8 agc[] = { AGC_TARGET, 0x1c, 0x20 };
u8 sec_agc[] = { 0x69, 0x00, 0xff, 0xff, 0x40, 0xff, 0x00, 0x40, 0x40 };
u8 unk1[] = { 0x93, 0x1a };
u8 unk2[] = { 0xb5, 0x7a };
deb("Demod init!\n");
if ((ret = mt352_write(fe, config, ARRAY_SIZE(config))) != 0)
return ret;
if ((ret = mt352_write(fe, clock, ARRAY_SIZE(clock))) != 0)
return ret;
if ((ret = mt352_write(fe, reset, ARRAY_SIZE(reset))) != 0)
return ret;
if ((ret = mt352_write(fe, adc_ctl, ARRAY_SIZE(adc_ctl))) != 0)
return ret;
if ((ret = mt352_write(fe, agc, ARRAY_SIZE(agc))) != 0)
return ret;
if ((ret = mt352_write(fe, sec_agc, ARRAY_SIZE(sec_agc))) != 0)
return ret;
if ((ret = mt352_write(fe, unk1, ARRAY_SIZE(unk1))) != 0)
return ret;
if ((ret = mt352_write(fe, unk2, ARRAY_SIZE(unk2))) != 0)
return ret;
return 0;
}
static struct mt352_config m920x_mt352_config = {
.demod_address = 0x0f,
.no_tuner = 1,
.demod_init = m920x_mt352_demod_init,
};
static struct zl10353_config tvgo_t02q_zl10353_config = {
.demod_address = 0x1e,
.no_tuner = 1,
.parallel_ts = 1,
};
static struct mt2060_config tvgo_t02q_mt2060_config = {
.i2c_address = 0x60,
};
static int mt2060_tuner_attach(struct dvb_usb_adapter *adap)
{
return dvb_attach(mt2060_attach,adap->fe, &adap->dev->i2c_adap,
&tvgo_t02q_mt2060_config,0) == NULL ? -ENODEV : 0;
}
static struct tda1004x_config m920x_tda10046_08_config = {
.demod_address = 0x08,
.invert = 0,
.invert_oclk = 0,
.ts_mode = TDA10046_TS_SERIAL,
.xtal_freq = TDA10046_XTAL_16M,
.if_freq = TDA10046_FREQ_045,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GPTRI,
.request_firmware = NULL,
};
static struct tda1004x_config m920x_tda10046_0b_config = {
.demod_address = 0x0b,
.invert = 0,
.invert_oclk = 0,
.ts_mode = TDA10046_TS_SERIAL,
.xtal_freq = TDA10046_XTAL_16M,
.if_freq = TDA10046_FREQ_045,
.agc_config = TDA10046_AGC_TDA827X,
.gpio_config = TDA10046_GPTRI,
.request_firmware = NULL, /* uses firmware EEPROM */
};
/* tuner configurations */
static struct qt1010_config m920x_qt1010_config = {
.i2c_address = 0x62
};
/* Callbacks for DVB USB */
static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap)
{
deb("%s\n",__FUNCTION__);
if ((adap->fe = dvb_attach(mt352_attach,
&m920x_mt352_config,
&adap->dev->i2c_adap)) == NULL)
return -EIO;
return 0;
}
static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap)
{
deb("%s\n",__FUNCTION__);
if ((adap->fe = dvb_attach(tda10046_attach,
&m920x_tda10046_08_config,
&adap->dev->i2c_adap)) == NULL)
return -EIO;
return 0;
}
static int tvgo_t02q_frontend_attach(struct dvb_usb_adapter *adap)
{
deb("tvgo_t02q_frontend_attach!\n");
if ((adap->fe = dvb_attach(zl10353_attach, &tvgo_t02q_zl10353_config,
&adap->dev->i2c_adap)) != NULL)
return 0;
return -EIO;
}
static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap)
{
deb("%s\n",__FUNCTION__);
if ((adap->fe = dvb_attach(tda10046_attach,
&m920x_tda10046_0b_config,
&adap->dev->i2c_adap)) == NULL)
return -EIO;
return 0;
}
static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
{
deb("%s\n",__FUNCTION__);
if (dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL)
return -ENODEV;
return 0;
}
static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap)
{
deb("%s\n",__FUNCTION__);
if (dvb_attach(tda827x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL)
return -ENODEV;
return 0;
}
static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
{
deb("%s\n",__FUNCTION__);
if (dvb_attach(tda827x_attach, adap->fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL)
return -ENODEV;
return 0;
}
/* device-specific initialization */
static struct m920x_inits megasky_rc_init [] = {
{ M9206_RC_INIT2, 0xa8 },
{ M9206_RC_INIT1, 0x51 },
{ } /* terminating entry */
};
static struct m920x_inits tvwalkertwin_rc_init [] = {
{ M9206_RC_INIT2, 0x00 },
{ M9206_RC_INIT1, 0xef },
{ 0xff28, 0x00 },
{ 0xff23, 0x00 },
{ 0xff21, 0x30 },
{ } /* terminating entry */
};
/* ir keymaps */
static struct dvb_usb_rc_key megasky_rc_keys [] = {
{ 0x0, 0x12, KEY_POWER },
{ 0x0, 0x1e, KEY_CYCLEWINDOWS }, /* min/max */
{ 0x0, 0x02, KEY_CHANNELUP },
{ 0x0, 0x05, KEY_CHANNELDOWN },
{ 0x0, 0x03, KEY_VOLUMEUP },
{ 0x0, 0x06, KEY_VOLUMEDOWN },
{ 0x0, 0x04, KEY_MUTE },
{ 0x0, 0x07, KEY_OK }, /* TS */
{ 0x0, 0x08, KEY_STOP },
{ 0x0, 0x09, KEY_MENU }, /* swap */
{ 0x0, 0x0a, KEY_REWIND },
{ 0x0, 0x1b, KEY_PAUSE },
{ 0x0, 0x1f, KEY_FASTFORWARD },
{ 0x0, 0x0c, KEY_RECORD },
{ 0x0, 0x0d, KEY_CAMERA }, /* screenshot */
{ 0x0, 0x0e, KEY_COFFEE }, /* "MTS" */
};
static struct dvb_usb_rc_key tvwalkertwin_rc_keys [] = {
{ 0x0, 0x01, KEY_ZOOM }, /* Full Screen */
{ 0x0, 0x02, KEY_CAMERA }, /* snapshot */
{ 0x0, 0x03, KEY_MUTE },
{ 0x0, 0x04, KEY_REWIND },
{ 0x0, 0x05, KEY_PLAYPAUSE }, /* Play/Pause */
{ 0x0, 0x06, KEY_FASTFORWARD },
{ 0x0, 0x07, KEY_RECORD },
{ 0x0, 0x08, KEY_STOP },
{ 0x0, 0x09, KEY_TIME }, /* Timeshift */
{ 0x0, 0x0c, KEY_COFFEE }, /* Recall */
{ 0x0, 0x0e, KEY_CHANNELUP },
{ 0x0, 0x12, KEY_POWER },
{ 0x0, 0x15, KEY_MENU }, /* source */
{ 0x0, 0x18, KEY_CYCLEWINDOWS }, /* TWIN PIP */
{ 0x0, 0x1a, KEY_CHANNELDOWN },
{ 0x0, 0x1b, KEY_VOLUMEDOWN },
{ 0x0, 0x1e, KEY_VOLUMEUP },
};
/* DVB USB Driver stuff */
static struct dvb_usb_device_properties megasky_properties;
static struct dvb_usb_device_properties digivox_mini_ii_properties;
static struct dvb_usb_device_properties tvwalkertwin_properties;
static struct dvb_usb_device_properties dposh_properties;
static struct dvb_usb_device_properties tvgo_t02q_properties;
static int m920x_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dvb_usb_device *d = NULL;
int ret;
struct m920x_inits *rc_init_seq = NULL;
int bInterfaceNumber = intf->cur_altsetting->desc.bInterfaceNumber;
deb("Probing for m920x device at interface %d\n", bInterfaceNumber);
if (bInterfaceNumber == 0) {
if ((ret = dvb_usb_device_init(intf, &megasky_properties, THIS_MODULE, &d)) == 0 ||
(ret = dvb_usb_device_init(intf, &tvgo_t02q_properties, THIS_MODULE, &d)) == 0) {
rc_init_seq = megasky_rc_init;
goto found;
}
if ((ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties,
THIS_MODULE, &d)) == 0) {
goto found;
}
if ((ret = dvb_usb_device_init(intf, &tvwalkertwin_properties,
THIS_MODULE, &d)) == 0) {
rc_init_seq = tvwalkertwin_rc_init;
goto found;
}
if ((ret = dvb_usb_device_init(intf, &dposh_properties,
THIS_MODULE, &d)) == 0) {
goto found;
}
return ret;
} else {
}
found:
if ((ret = m920x_init_ep(intf)) < 0)
return ret;
if (d && (ret = m920x_init(d, rc_init_seq)) != 0)
return ret;
return ret;
}
static struct usb_device_id m920x_table [] = {
{ USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) },
{ USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T02Q) },
{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, USB_PID_MSI_DIGI_VOX_MINI_II) },
{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) },
{ USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, m920x_table);
static struct dvb_usb_device_properties megasky_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-megasky-02.fw",
.download_firmware = m920x_firmware_download,
.rc_interval = 100,
.rc_key_map = megasky_rc_keys,
.rc_key_map_size = ARRAY_SIZE(megasky_rc_keys),
.rc_query = m920x_rc_query,
.size_of_priv = sizeof(struct m920x_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
.pid_filter = m920x_pid_filter,
.pid_filter_ctrl = m920x_pid_filter_ctrl,
.frontend_attach = m920x_mt352_frontend_attach,
.tuner_attach = m920x_qt1010_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 512,
}
}
},
}},
.i2c_algo = &m920x_i2c_algo,
.num_device_descs = 1,
.devices = {
{ "MSI Mega Sky 580 DVB-T USB2.0",
{ &m920x_table[0], NULL },
{ NULL },
}
}
};
static struct dvb_usb_device_properties tvgo_t02q_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER | DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-t02q-02.fw",
.download_firmware = m920x_firmware_download,
.size_of_priv = sizeof(struct m920x_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
.pid_filter_count = 8,
.pid_filter = m920x_pid_filter,
.pid_filter_ctrl = m920x_pid_filter_ctrl,
.frontend_attach = tvgo_t02q_frontend_attach,
.tuner_attach = mt2060_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 512,
}
}
},
}},
.i2c_algo = &m920x_i2c_algo,
.num_device_descs = 1,
.devices = {
{ "Genius TVGo DVB-T02Q",
{ &m920x_table[1], NULL },
{ NULL },
},
}
};
static struct dvb_usb_device_properties digivox_mini_ii_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-digivox-02.fw",
.download_firmware = m920x_firmware_download,
.size_of_priv = sizeof(struct m920x_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
.pid_filter = m920x_pid_filter,
.pid_filter_ctrl = m920x_pid_filter_ctrl,
.frontend_attach = m920x_tda10046_08_frontend_attach,
.tuner_attach = m920x_tda8275_60_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 0x4000,
}
}
},
}},
.i2c_algo = &m920x_i2c_algo,
.num_device_descs = 1,
.devices = {
{ "MSI DIGI VOX mini II DVB-T USB2.0",
{ &m920x_table[2], NULL },
{ NULL },
},
}
};
/* LifeView TV Walker Twin support by Nick Andrew <nick@xxxxxxxxxxxxxxx>
*
* LifeView TV Walker Twin has 1 x M9206, 2 x TDA10046, 2 x TDA8275A
* TDA10046 #0 is located at i2c address 0x08
* TDA10046 #1 is located at i2c address 0x0b
* TDA8275A #0 is located at i2c address 0x60
* TDA8275A #1 is located at i2c address 0x61
*/
static struct dvb_usb_device_properties tvwalkertwin_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-tvwalkert.fw",
.download_firmware = m920x_firmware_download,
.rc_interval = 100,
.rc_key_map = tvwalkertwin_rc_keys,
.rc_key_map_size = ARRAY_SIZE(tvwalkertwin_rc_keys),
.rc_query = m920x_rc_query,
.size_of_priv = sizeof(struct m920x_state),
.identify_state = m920x_identify_state,
.num_adapters = 2,
.adapter = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
.pid_filter = m920x_pid_filter,
.pid_filter_ctrl = m920x_pid_filter_ctrl,
.frontend_attach = m920x_tda10046_08_frontend_attach,
.tuner_attach = m920x_tda8275_60_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 512,
}
}
}},{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
.pid_filter = m920x_pid_filter,
.pid_filter_ctrl = m920x_pid_filter_ctrl,
.frontend_attach = m920x_tda10046_0b_frontend_attach,
.tuner_attach = m920x_tda8275_61_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x82,
.u = {
.bulk = {
.buffersize = 512,
}
}
},
}},
.i2c_algo = &m920x_i2c_algo,
.num_device_descs = 1,
.devices = {
{ .name = "LifeView TV Walker Twin DVB-T USB2.0",
.cold_ids = { &m920x_table[3], NULL },
.warm_ids = { &m920x_table[4], NULL },
},
}
};
static struct dvb_usb_device_properties dposh_properties = {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.firmware = "dvb-usb-dposh-01.fw",
.download_firmware = m920x_firmware_download,
.size_of_priv = sizeof(struct m920x_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
/* Hardware pid filters don't work with this device/firmware */
.frontend_attach = m920x_mt352_frontend_attach,
.tuner_attach = m920x_qt1010_tuner_attach,
.stream = {
.type = USB_BULK,
.count = 8,
.endpoint = 0x81,
.u = {
.bulk = {
.buffersize = 512,
}
}
},
}},
.i2c_algo = &m920x_i2c_algo,
.num_device_descs = 1,
.devices = {
{ .name = "Dposh DVB-T USB2.0",
.cold_ids = { &m920x_table[5], NULL },
.warm_ids = { &m920x_table[6], NULL },
},
}
};
static struct usb_driver m920x_driver = {
#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,15)
.owner = THIS_MODULE,
#endif
.name = "dvb_usb_m920x",
.probe = m920x_probe,
.disconnect = dvb_usb_device_exit,
.id_table = m920x_table,
};
/* module stuff */
static int __init m920x_module_init(void)
{
int ret;
if ((ret = usb_register(&m920x_driver))) {
err("usb_register failed. Error number %d", ret);
return ret;
}
return 0;
}
static void __exit m920x_module_exit(void)
{
/* deregister this driver from the USB subsystem */
usb_deregister(&m920x_driver);
}
module_init (m920x_module_init);
module_exit (m920x_module_exit);
MODULE_AUTHOR("Aapo Tahkola <aet@xxxxxxxxxxxxxx>");
MODULE_DESCRIPTION("DVB Driver for ULI M920x");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");
/*
* Local variables:
* c-basic-offset: 8
*/
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
