Hello, linuxtv. Technotrend budget tt s-1500 don't work if voltage=0 ? ============================================================ example 1 4 cards, 1 splitter, vlc, os slackware 1 card set vlotage=13 result work 2,3,4 set voltage=0 result don't work if 1,2,3,4 cards set voltage=13 result don't work (vlc always restart after 1-3 seconds and says that can't tune) change 4 differents splitters same result so it work's only if use splitter 1 out power pass so i set on all cards voltage=13 and all cards work ============================================================ example 2 1 card set vlotage=18 result work 2,3,4 set voltage=0 result don't work* *BUT IF I SET 2,3,4 voltage=18 then stop vlc and then set 2,3,4 voltage=0 result 2,3,4 begin to work *WORK ONLY IF VOLTAGE=18 ============================================================ example 3 also test on Technotrend Budget S-1401 1 card set vlotage=13 result work 2,3,4 set voltage=0 result work ============================================================ i think that card Technotrend budget tt s-1500 don't switch on tuner or something else if voltage=0. -- best regards _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
