Hi ISELT_SOFT@xxxxxxxxxxx schrieb: > Hallo, > > i have a Vivanco DVB-T Hybrid Cardbus (Card=94), it is the same like > Lifeview DVB-T Hybrid Cardbus. > The Adapter works for a long time, but since two weeks it is not > possible to use the DVB-T Tuner. > Analog TV and Radio works good. > dmesg show this lines after reboot: > > ... > tda1004x: setting up plls for 48MHz sampling clock > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: trying to boot from eeprom > tda1004x: found firmware revision 0 -- invalid > tda1004x: waiting for firmware upload... > tda1004x: found firmware revision 29 -- ok > ... > Hm, his is not really correct: All Lifeview cards i saw so far have a firmware eeprom, so download from host should not happen... There are tons of slightly different Lifeview designs. I wonder whether the description is really right... > I think that looks ok. > > But if i start kaffeine i get sometime this: > > ... > tda1004x: setting up plls for 48MHz sampling clock > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: trying to boot from eeprom > tda1004x: found firmware revision 0 -- invalid > tda1004x: waiting for firmware upload... > tda1004x: found firmware revision 5e -- invalid > tda 1004x: firmware upload failed > ... > > But then i delete the firmware and reboot and then start kaffeine and do > a channelscan i get an error because the firmware is not found. Then i > copy the firmware to /lib/firmware (dont leave kaffeine) and start a new > channelscan and it works. I get then this: > > ... > tda1004x: setting up plls for 48MHz sampling clock > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: trying to boot from eeprom > tda1004x: found firmware revision 0 -- invalid > tda1004x: waiting for firmware upload... > tda1004x: found firmware revision 29 -- ok > ... > > and i can scan the chanels, but some times then i switch the channel or > leave kaffeine and start it again i get the same massage like above: > > ... > tda1004x: setting up plls for 48MHz sampling clock > tda1004x: timeout waiting for DSP ready > tda1004x: found firmware revision 0 -- invalid > tda1004x: trying to boot from eeprom > tda1004x: found firmware revision 0 -- invalid > tda1004x: waiting for firmware upload... > tda1004x: found firmware revision 5e -- invalid > tda 1004x: firmware upload failed > ... > > What is wrong? > > My System: SuSe Linux 10.2 kernel 2.6.8, V4L-DVB from linuxtv.org > > also tested kernel 2.6.21, 2.6.22 with V4L-DVB from linuxtv.org with the > same result > Are you able to try some modifications after i gave you some instructions? I would guess that the tda01146 GPIO configuration is wrong for your card. (I made changes here to solve another problem). Hartmut _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
