Hallo, -----Original Message----- Date: Wed, 23 May 2007 00:57:52 +0200 Subject: Re: Vivanco DVB-T Hybrid Cardbus (LR502) dosn'twork From: Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx> To: "ISELT_SOFT@xxxxxxxxxxx" <ISELT_SOFT@xxxxxxxxxxx> >Hi >ISELT_SOFT@xxxxxxxxxxx schrieb: >> Hallo, >> >> i have a Vivanco DVB-T Hybrid Cardbus (Card=94), it is the samelike >> Lifeview DVB-T Hybrid Cardbus. >> The Adapter works for a long time, but since two weeks it isnot >> possible to use the DVB-T Tuner. >> Analog TV and Radio works good. >> dmesg show this lines after reboot: >> >> ... >> tda1004x: setting up plls for 48MHz sampling clock >> tda1004x: timeout waiting for DSP ready >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: trying to boot from eeprom >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: waiting for firmware upload... >> tda1004x: found firmware revision 29 -- ok >> ... >> >Hm, his is not really correct: All Lifeview cards i saw so far >have a firmware eeprom, so download from host should nothappen... I think you are rigth. I used this card some month withoutinstalling any firmware. But now the driver ask for it. >There are tons of slightly different Lifeview designs. I wonder >whether the description is really right... > >> I think that looks ok. >> >> But if i start kaffeine i get sometime this: >> >> ... >> tda1004x: setting up plls for 48MHz sampling clock >> tda1004x: timeout waiting for DSP ready >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: trying to boot from eeprom >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: waiting for firmware upload... >> tda1004x: found firmware revision 5e -- invalid >> tda 1004x: firmware upload failed >> ... >> >> But then i delete the firmware and reboot and then startkaffeine and do >> a channelscan i get an error because the firmware is notfound. Then i >> copy the firmware to /lib/firmware (dont leave kaffeine) andstart a new >> channelscan and it works. I get then this: >> >> ... >> tda1004x: setting up plls for 48MHz sampling clock >> tda1004x: timeout waiting for DSP ready >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: trying to boot from eeprom >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: waiting for firmware upload... >> tda1004x: found firmware revision 29 -- ok >> ... >> >> and i can scan the chanels, but some times then i switch thechannel or >> leave kaffeine and start it again i get the same massage likeabove: >> >> ... >> tda1004x: setting up plls for 48MHz sampling clock >> tda1004x: timeout waiting for DSP ready >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: trying to boot from eeprom >> tda1004x: found firmware revision 0 -- invalid >> tda1004x: waiting for firmware upload... >> tda1004x: found firmware revision 5e -- invalid >> tda 1004x: firmware upload failed >> ... >> >> What is wrong? >> >> My System: SuSe Linux 10.2 kernel 2.6.8, V4L-DVB fromlinuxtv.org >> >> also tested kernel 2.6.21, 2.6.22 with V4L-DVB from linuxtv.orgwith the >> same result >> >Are you able to try some modifications after i gave you someinstructions? >I would guess that the tda01146 GPIO configuration is wrong for yourcard. >(I made changes here to solve another problem). > >Hartmut Yes i can make modifikation in the Sourcecode if yor give me theinstructions. Ingofl _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
