Hello, I'm trying to configure my new WinTV HVR 1300 card. The DVB part works fine but I haven't succeed to make the analog and radio parts work. the devices are created but I have only noise for analog TV and no sound for radio. My kernel: 2.6.21 vanilla dmesg: cx2388x alsa driver version 0.0.6 loaded logips2pp: Detected unknown logitech mouse model 62 cx2388x v4l2 driver version 0.0.6 loaded cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected] TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe tveeprom 2-0050: Hauppauge model 96559, rev C5A0, serial# 450335 tveeprom 2-0050: MAC address is 00-0D-FE-06-DF-1F tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63) tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) tveeprom 2-0050: audio processor is CX882 (idx 33) tveeprom 2-0050: decoder processor is CX882 (idx 25) tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter cx88[0]: hauppauge eeprom: model=96559 input: cx88 IR (Hauppauge WinTV-HVR130 as /class/input/input3 cx88[0]/1: CX88x/0: ALSA support for cx2388x boards usb 1-2: new full speed USB device using ohci_hcd and address 3 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11 cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 11, latency: 32, mmio: 0xe0000000 tuner 2-0061: chip found @ 0xc2 (cx88[0]) tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) tuner 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) tuner 2-0063: chip found @ 0xc6 (cx88[0]) cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11 cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 11, latency: 32, mmio: 0xe2000000 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: reset full speed USB device using ohci_hcd and address 3 lirc_dev: lirc_register_plugin: sample_rate: 0 lirc_mceusb2[3]: SMK eHome Infrared Transceiver on usb1:3 cx2388x dvb driver version 0.0.6 loaded cx8802_register_driver() ->registering driver type=dvb access=shared CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (Conexant CX22702 DVB-T)... cx2388x blackbird driver version 0.0.6 loaded cx8802_register_driver() ->registering driver type=blackbird access=shared CORE cx88[0]: subsystem: 0070:9600, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56] cx88[0]/2: cx23416 based mpeg encoder (blackbird reference design) cx88[0]/2: registered device video1 [mpeg] loaded modules: cx88_blackbird firmware_class cx2341x cx22702 cx88_dvb cx88_vp3054_i2c dvb_pll video_buf_dvb cx8802 cx8800 compat_ioctl32 cx88_alsa cx88xx ir_common i2c_algo_bit tveeprom videodev v4l2_common btcx_risc video_buf i2c_core snd_pcm snd lspci: 01:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9600 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:07.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9600 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at e1000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 01:07.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9600 Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at e2000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 content of /dev: crw-rw---- 1 root video 212, 4 2007-05-22 17:55 /dev/dvb/adapter0/demux0 crw-rw---- 1 root video 212, 5 2007-05-22 17:55 /dev/dvb/adapter0/dvr0 crw-rw---- 1 root video 212, 3 2007-05-22 17:55 /dev/dvb/adapter0/frontend0 crw-rw---- 1 root video 212, 7 2007-05-22 17:55 /dev/dvb/adapter0/net0 crw-rw---- 1 root video 81, 0 2007-05-22 17:54 /dev/video0 crw-rw---- 1 root video 81, 1 2007-05-22 17:55 /dev/video1 crw-rw---- 1 root video 81, 64 2007-05-22 17:54 /dev/radio0 I'm french and we use the SECAM norm. Does the support for this card is complete? Have you got an idea? Thanks a lot. Nicolas _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
