Am Montag, 14. Mai 2007 20:08 schrieben Sie: > Uwe Bugla wrote: > > This patch synchronizes the documentation for bt8xx cards to the current > > state of kernel 2.6.22-rc1. It does not touch the outstanding DST > > problem, although it helps. > > > > Applies against: linux-2.6.22-rc1 > > > > Signed-off-by: Uwe Bugla <uwe.bugla@xxxxxx> > > > > --- a/Documentation/dvb/bt8xx.txt > > +++ b/Documentation/dvb/bt8xx.txt > > @@ -9,19 +9,27 @@ > > Please see Documentation/dvb/cards.txt => o Cards based on the Conexant > > Bt8xx PCI bridge: > > > > Compiling kernel please enable: > > -a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => > > "BT848 Video For Linux" +a.)"Device drivers" => "Multimedia devices" => > > "Video For Linux" => "Enable Video for Linux API 1 (DEPRECATED)" > > -b.)"Device drivers" => "Multimedia devices" => "Digital Video > > Broadcasting Devices" - => "DVB for Linux" "DVB Core Support" "Bt8xx > > based PCI Cards" > > +b.)"Device drivers" => "Multimedia devices" => "Video For Linux" => > > "Video Capture Adapters" => "BT848 Video For Linux" +c.)"Device drivers" > > => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB > > for Linux" "DVB Core Support" "Bt8xx based PCI Cards" + > > +Please use the following options with care as deselection of drivers > > which are in fact necessary +may result in DVB devices that cannot be > > tuned due to lack of driver support: +You can save RAM by deselecting > > every frontend module that your DVB card does not need. + > > +First please remove the static dependency of DVB card drivers on all > > frontend modules for all possible card variants by enabling: +d.) "Device > > drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" > > + => "DVB for Linux" "DVB Core Support" "Load and attach frontend modules > > as needed" + > > +If you know the frontend driver that your card needs please enable: > > +e.)"Device drivers" => "Multimedia devices" => "Digital Video > > Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Customise > > DVB Frontends" => "Customise the frontend modules to build" + Then please > > select your card-specific frontend module. > > > > 2) Loading Modules > > ================== > > > > -In default cases bttv is loaded automatically. > > -To load the backend either place dvb-bt8xx in etc/modules, or apply > > manually: - > > - $ modprobe dvb-bt8xx > > - > > -All frontends will be loaded automatically. > > > > > > > > +If the bttv driver detects a bt8xx-based DVB card, all frontend and > > backend modules will be loaded automatically. > > This part is not true, in some cases all the required dependencies are > not loaded automatically. Thanks, Manu, for offering some time on that. In a few minutes I will send in a corrected version, adding at least one exception that I can see :) Best regards Uwe > > > People running udev please see Documentation/dvb/udev.txt. > > > > In the following cases overriding the PCI type detection for dvb-bt8xx > > might be necessary: @@ -30,7 +38,6 @@ > > ------------------------------ > > > > $ modprobe bttv card=113 > > - $ modprobe dvb-bt8xx > > $ modprobe dst > > > > Useful parameters for verbosity level and debugging the dst module: > > @@ -65,10 +72,9 @@ > > Notice: The order of the card ID should be uprising: > > Example: > > $ modprobe bttv card=113 card=135 > > - $ modprobe dvb-bt8xx > > > > For a full list of card ID's please see > > Documentation/video4linux/CARDLIST.bttv. -In case of further problems > > send questions to the mailing list: www.linuxdvb.org. +In case of further > > problems please subscribe and send questions to the mailing list: > > linux-dvb@xxxxxxxxxxxx > > > > Authors: Richard Walker, > > Jamie Honan, > > Rest all looks fine. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
