I´ve been asking this before, but ...
Does anyone know if the problem occurs in windows to or is it a linux exclusive, if it´s ok in
windows it´s fixabel.
Also does anyone know if the hauppage driver includes it own, as in special USB controller driver for the onboard usb controller ?
Someone mentioned that the revision of the usb controller on the card is very old, maybe it has a hardware bug that needs
special attention ?
/Henrik
On 4/26/07,
Mike H <mike@xxxxxxxxxxxxx> wrote:
The disconnect problem is the exact same problem I keep getting. I've
tried to ask on the linux-usb lists, but I was told that i "had faulty
hardware if I keep getting disconnects" - I don't think so as a lot of
us Nova-T users seem to be getting the exact same disconnect problem.
Hope someone comes up with a fix soon, or at least can help us figure
out what's causing it!
Cheers,
Mike
Chris Murton wrote:
> So i've been testing various scenarios since my last post, none of
> which have improved matters to any extent with my Hauppage WinTV
> Nova-T 500 PCI.
>
> I thought I'd go back to latest v4l drivers against 2.6.20, but with
> these.. nothing locks on MythTV. I'm just getting constant "(L_s)
> Partial Lock"s on every single channel I have. This is with both
> dvb-usb-dib0700-01.fw and dvb-usb-dib0700-02-rc1.fw. The only way I
> can get picture back is to revert to the kernel drivers against either
> the old firmware or the rc1 firmware (which both work.. for a while).
>
> Is there light at the end of the Nova-T 500 PCI card tunnel?
>
> Thanks,
> Chris
>
> Chris Murton wrote:
>> Hi,
>>
>> I upgraded to the latest hg drivers against a 2.6.20 kernel for my
>> Nova-T 500 USB and whilst the Oopses went away, the driver now
>> appears to disconnect more frequently than it did before - I'm also
>> seeing more frequent partial locks in MythTV (L_s instead of LMS).
>>
>> Apr 21 10:44:46 basil kernel: usb 2-1: USB disconnect, address 2
>> Apr 21 10:46:44 basil kernel: dvb-usb: could not submit URB no. 0 -
>> get them all back
>> Apr 21 10:46:44 basil kernel: dvb-usb: error while enabling fifo.
>> Apr 21 10:50:10 basil kernel: dvb-usb: error while stopping stream.
>>
>> I tried the latest firmware that I could find
>> (dvb-usb-dib0700-02-rc1.fw) and that gave me similar results with no
>> noticeable improvement.
>>
>> I'm now trying a different approach, using the 2.6.20 kernel drivers
>> with the latest firmware.. the partial locks have gone away and no
>> disconnects yet but it's only been running for 30 minutes!
>>
>> Also, I don't know if anyone else has had this but when the USB
>> disconnects occur it does not reconnect, but as soon as I reboot
>> something must trigger the USB device to come back on as I can see it
>> being re-probed and brought online as the box is going down - any
>> thoughts?
>>
>> Thanks
>> Chris
>>
>> _______________________________________________
>> linux-dvb mailing list
>> linux-dvb@xxxxxxxxxxx
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
