Matt
On 3/15/07,
Tom Jacobs <tom.jacobs@xxxxxxxxx> wrote:
i am having problems getting data from my STB
i am using Mythdora as my distro so, i believe this is basically Fedora
Core 5 with MythTV-0.20 included (and various other required packages).
i have a Hauppauge DEC2000 stb which i am trying to use within mythtv.
the correct firmware is in /lib/firmware and from dmesg i can see the
adapter and frontend are both registered.
i can successfully ./scan for available channels and have produced my
channels.conf file. when i ./tzap i get the following:
[root@mythtv_linux ~]# tzap -r "BBC TWO"
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
tuning to 641833330 Hz
video pid 0x0262, audio pid 0x0263
status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e |
status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e |
FE_HAS_LOCK
status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e |
FE_HAS_LOCK
status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e |
FE_HAS_LOCK
status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e |
FE_HAS_LOCK
if i pick different channels the frequency an pids change but i always
get signal 0000 and a lock. if i try and capture stream using the following:
cat /dev/dvb/adapter0/dvr0 > myvideo.mpg
i get a file of zero bytes. if i try and use mplayer or xine they both
fail too. since this is a stb also i can play a scart cable into it and
i do see that the channels are being changed when i tzap but i just
dont seem to be getting any data back from the stb.
does anyone have any ideas?
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
