i am having problems getting data from my STB i am using Mythdora as my distro so, i believe this is basically Fedora Core 5 with MythTV-0.20 included (and various other required packages). i have a Hauppauge DEC2000 stb which i am trying to use within mythtv. the correct firmware is in /lib/firmware and from dmesg i can see the adapter and frontend are both registered. i can successfully ./scan for available channels and have produced my channels.conf file. when i ./tzap i get the following: [root@mythtv_linux ~]# tzap -r "BBC TWO" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 641833330 Hz video pid 0x0262, audio pid 0x0263 status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e | status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e | FE_HAS_LOCK status 1f | signal 0000 | snr 0000 | ber 00000000 | unc 009c645e | FE_HAS_LOCK if i pick different channels the frequency an pids change but i always get signal 0000 and a lock. if i try and capture stream using the following: cat /dev/dvb/adapter0/dvr0 > myvideo.mpg i get a file of zero bytes. if i try and use mplayer or xine they both fail too. since this is a stb also i can play a scart cable into it and i do see that the channels are being changed when i tzap but i just dont seem to be getting any data back from the stb. does anyone have any ideas? _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
