Re: TT-1500 / TDA10046

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Jumper is removed, there is 0 volts provided on the antenna input of the T-1500.

The resistance of the antenna itself shows 3.3 Ohms which is quite low, but as the booster is removed this should be OK I think?


On 21 Feb 2007, at 16:55, Jouni wrote:


You can check the antenna with ohm-meter, if it is near 0, then it would
short the 5V supply. But if you disabled the 5V with jumper (checked it
with voltmeter?) it would not make difference.



On Wed, 21 Feb 2007 14:12:04 +0000, "Nicholas Fearnley"
I have removed the jumper on the card that provides the amp (there is  
only one jumper).

But as to whether or not the antenna still shorts I'm not sure.  Can  
I check with a multimeter?

I read about turning off the amp (I2C 0x65) which means little to  
me!  It's on the wiki.


On 21 Feb 2007, at 10:44, Jouni wrote:


What type of antenna you are using?
My TT-1500 will not get good signal, if the antenna shorts the 5V feed
for antenna amp from
the cards antenna in -connector.



On Tue, 20 Feb 2007 23:37:06 +0000, "Nicholas Fearnley"
I have had real problems getting the TT-1500 (DVB-T) working.

I have been using dvbtune for some diagnostics.

The following should yield BBC Multiplex on my local transmitter

dvbtune -c 0 -qam 16 -gi 32 -cr 3_4 -bw 8 -tm 2 -f 722000

It does not, I tried adding 166Khz (722166) but no luck.  So I tried
just working my way through some frequencies.  I can get the
FE_STATUS to report FE_HAS_SIGNAL on some frequencies.  I even get
FE_HAS_CARRIER on occasion but never any more than that.

Does this mean the tuner is getting *something*.  It's not random for
sure, I always get this result on the few frequencies I have tried.
I am using 2.6.18.1.  I know the signal (antenna) to be OK as I get
no issues with a CX based DVB-T module, on any frequency I pick.
This has to be a driver or settings issue.  I compile the relevant
modules into the kernel, I get valid firmware loads in dmesg (version
20).

I can insert relevant debugging code if needed - if anyone has any
ideas what might help.  I can send a TT unit out if anyone needs one
to test with.

Nick


_______________________________________________
linux-dvb mailing list
-- 
  Jouni

-- 
http://www.fastmail.fm - A no graphics, no pop-ups email service


-- 
  Jouni

-- 
http://www.fastmail.fm - Does exactly what it says on the tin


_______________________________________________
linux-dvb mailing list

Nicholas Fearnley
Digital Media Projects Ltd
1 City Square
Leeds
LS1 2ES

t: 011 33 66 33 66
m: 07796 147 320

Disclaimer:

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.



_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux