tim belina wrote: [snip] > However, the card doesn't work properly: > > 1) I see only a single card in YaST, which describes the card as a > FusionHDTV DVB-T Dual Digital. Perhaps that is correct, but I'm unsure > if I should see one for each of the "dual" receivers. Do, "modprobe cx88-dvb" ... Then you will see the second adapter. > 2) I can only receive a signal from the USB part of the card. ie: I > have only one input. MythTV and Kaffeine for example, can only see one > receiver. If I pull out the USB cable (connecting the card to a rear > USB port) I get no signal at all. See above. > 3) Tzap and mythtv all get a signal if the USB cable is in, but the > signal is rubbish, with heaps of break-up and stuttering. Kaffeine > cannot even tune a station at all! I recommend an in-line amplifier. That will help your signal problems. Cheers, Mike Krufky _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
