hi, I'm running 2.6.20 now and I use the firmware dvb-usb-dib0700-02-rc1.fw usb 1-4: new high speed USB device using ehci_hcd and address 4 usb 1-4: configuration #1 chosen from 1 choice dib0700: loaded with support for 2 different device-types dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. **WARNING** I2C adapter driver [Hauppauge Nova-T Stick] forgot to specify physical device; fix it! dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick). **WARNING** I2C adapter driver [DiBX000 tuner I2C bus] forgot to specify physical device; fix it! DVB: registering frontend 0 (DiBcom 7000PC)... MT2060: successfully identified (IF1 = 1220) dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. usbcore: registered new interface driver dvb_usb_dib0700 Does anyone have an idea about this? Greetings, Simon > hi again, > > now I use linux 2.6.20-rc7-git3 and (nearly) nothing has changed. > When I plug in the stick, dmesg tells me the following: > > dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a > firmware > dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' > dib0700: firmware started successfully. > dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. > **WARNING** I2C adapter driver [Hauppauge Nova-T Stick] forgot to specify > physical device; fix it! > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. > DVB: registering new adapter (Hauppauge Nova-T Stick). > dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick' > dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. > > As you can see there is a warning about I2C and again no frintend has been > registered by the stick's driver. > > The USB ID of the stick is 7060, which is now recognized by the kernel. > > Did anynone solve this? > > > Best Regards, Simon > > > hi Darren, > > > > thank you for your reply. > > > > > My Nova-T stick (ID 2040:7050) requires mt2060, support for which is in > > > the v4l-dvb repository and 2.6.20-rc*; it looks like yours is also > > > supported. > > > > > > If you choose to use the repository, make sure that /lib/modules/`uname > > > -r`/kernel/drivers/media is moved out of the way and that no v4l or dvb > > > modules are loaded. > > > > mt2060 is already in 2.6.19 as you may see here : > > > > Module Size Used by > > mt2060 3204 0 > > dvb_usb_dib0700 6920 0 > > dvb_usb 11724 1 dvb_usb_dib0700 > > dvb_core 56424 1 dvb_usb > > dvb_pll 8004 1 dvb_usb > > dib3000mc 8452 1 dvb_usb_dib0700 > > dibx000_common 1668 1 dib3000mc > > > > I have to load it manually but no change after that... > > > > I'll give the 2.6.20* a try. -- Simon Keimer _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb