hi again, now I use linux 2.6.20-rc7-git3 and (nearly) nothing has changed. When I plug in the stick, dmesg tells me the following: dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw' dib0700: firmware started successfully. dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. **WARNING** I2C adapter driver [Hauppauge Nova-T Stick] forgot to specify physical device; fix it! dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Hauppauge Nova-T Stick). dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick' dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected. As you can see there is a warning about I2C and again no frintend has been registered by the stick's driver. The USB ID of the stick is 7060, which is now recognized by the kernel. Did anynone solve this? Best Regards, Simon > hi Darren, > > thank you for your reply. > > > My Nova-T stick (ID 2040:7050) requires mt2060, support for which is in > > the v4l-dvb repository and 2.6.20-rc*; it looks like yours is also > > supported. > > > > If you choose to use the repository, make sure that /lib/modules/`uname > > -r`/kernel/drivers/media is moved out of the way and that no v4l or dvb > > modules are loaded. > > mt2060 is already in 2.6.19 as you may see here : > > Module Size Used by > mt2060 3204 0 > dvb_usb_dib0700 6920 0 > dvb_usb 11724 1 dvb_usb_dib0700 > dvb_core 56424 1 dvb_usb > dvb_pll 8004 1 dvb_usb > dib3000mc 8452 1 dvb_usb_dib0700 > dibx000_common 1668 1 dib3000mc > > I have to load it manually but no change after that... > > I'll give the 2.6.20* a try. -- Simon Keimer _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
