Hi all,
I'm having a problem with the ASUSTeK P7131 Dual (an saa7134 based dvb
card) pci capture card's remote IR controller , it's handled pretty well
with latest linuxtv drivers, however after a while the IR remote stop
responding completely, and unloading/reloading the whole dvb framework
modules doesn't get it back working. Everything else still works (that
is dvb-t still works properly, I haven't used the analogic capturing
features so far)
I tried to turn on debugging informations in the saa7134-input module,
but nothing special appears in there, before or after the IR remote
stops working.
If you have a few pointers as to what I could try to debug the problem,
I'd be very happy. As far as I understand, that specific IR driver uses
an IRQ, so maybe that IRQ stop working for some reason ?
Here are more informations on the specific model from dmesg, this is the
1043:4876 model :
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:02.0, rev: 209, irq: 11, latency: 64, mmio:
0xfddff000
saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Dual
[card=78,autodetected]
saa7133[0]: board init: gpio is 40000
input: saa7134 IR (ASUSTeK P7131 Dual) as /class/input/input3
tuner 0-004b: chip found @ 0x96 (saa7133[0])
tuner 0-004b: setting tuner address to 61
tuner 0-004b: type set to tda8290+75a
tuner 0-004b: setting tuner address to 61
tuner 0-004b: type set to tda8290+75a
saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 1 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
Vincent Penne
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
