----- "Will Colwyn" <will@xxxxxxxxxxxxxxxxxx> wrote: > David Stevenson wrote: > > ----- "Will Colwyn" <will@xxxxxxxxxxxxxxxxxx> wrote: > > > >>David Stevenson wrote: > >> > >>>Hi all, > >>> > > > > <snip> > > > >>Looks like the initial scan file for Mendip is wrong. The frequency > > >>/should/ be 778167000. (Mux1 is on channel 59+ according to the DTG > >>website) > >> > > > > > > I tried this, thanks for the info. It still fails to tune. After you > mentioned the DTG, I found the website and had a look. I assume there > is some magic calculation as I do not see how you extrapolated > 778167000 from the figures in their table ;-) > > Frequency = 306+(channel*8) MHz, with possibly +/- 167KHz offset > > > Here is the line from my new uk-Mendip file: > > > > T 778167000 8MHz 2/3 NONE QAM16 2k 1/32 NONE > > > > Try > > T 778167000 8MHz 3/4 NONE QAM16 2k 1/32 NONE > This lists (in particular Will) was enough to point me in the right direction and get a working DVB setup after days of searching. I found it real difficult to find this information on the web so I have put my altered uk-Mendip config file on my web server and submitted it to Google in the hope it helps others in my region find information. http://www.dgssoftware.co.uk/uk-Mendip Quid pro quo! David. > > Will > -- > Will Colwyn <will@xxxxxxxxxxxxxxxxxx> > Watergate Technologies Limited > www.watergate-tech.com _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
