I have a Gentoo and I tried this with 2.6.17 and 2.6.18 kernels:
** downloaded and installed the drivers
hg clone http://linuxtv.org/hg/~pb/v4l-dvb
cd v4l-dvb/v4l
make
make install
** downloaded and installed the firmware
cd /lib/firmware
wget http://vaasa.wi-bw.tfh-wildau.de/~pboettch/home/files/dvb-usb-dib0700-01.fw
I plugged the stick and got this:
Jan 10 23:08:06 xxx usb 1-4: new high speed USB device using ehci_hcd and address 7
Jan 10 23:08:06 xxx usb 1-4: configuration #1 chosen from 1 choice
Jan 10 23:08:06 xxx dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
Jan 10 23:08:06 xxx dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
Jan 10 23:08:06 xxx dib0700: firmware started successfully.
Jan 10 23:08:07 xxx dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
Jan 10 23:08:07 xxx dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan 10 23:08:07 xxx DVB: registering new adapter (Hauppauge Nova-T Stick).
Jan 10 23:08:07 xxx DVB: registering frontend 0 (DiBcom 7000PC)...
Jan 10 23:08:07 xxx DVB: Unable to find symbol mt2060_attach()
Jan 10 23:08:07 xxx dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
** the mt2060 module is not loaded...
modprobe mt2060
Then I unplugged and plugged the stick and the result was this:
Jan 10 23:08:38 xxx usb 1-4: USB disconnect, address 7
Jan 10 23:08:38 xxx dvb-usb: Hauppauge Nova-T Stick successfully deinitialized and disconnected.
Jan 10 23:08:40 xxx usb 1-4: new high speed USB device using ehci_hcd and address 8
Jan 10 23:08:41 xxx usb 1-4: configuration #1 chosen from 1 choice
Jan 10 23:08:41 xxx dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
Jan 10 23:08:41 xxx dvb-usb: downloading firmware from file 'dvb-usb-dib0700-01.fw'
Jan 10 23:08:41 xxx dib0700: firmware started successfully.
Jan 10 23:08:41 xxx dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
Jan 10 23:08:41 xxx dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan 10 23:08:41 xxx DVB: registering new adapter (Hauppauge Nova-T Stick).
Jan 10 23:08:42 xxx DVB: registering frontend 0 (DiBcom 7000PC)...
Jan 10 23:08:42 xxx MT2060: successfully identified (IF1 = 1220)
Jan 10 23:08:42 xxx dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
I grabbed the channels with dvbscan and started the vdr. When running the vdr the "tail -f /var/log/messages" in console results this:
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:36 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:37 xxx mt2060 I2C read failed
Jan 10 23:21:38 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:39 xxx mt2060 I2C read failed
Jan 10 23:21:40 xxx mt2060 I2C read failed
Jan 10 23:21:41 xxx mt2060 I2C read failed
I can watch some of the channels and when trying to change a channel it works randomly. This might not be relevant but the stick has a small led which won't lid... ;)
Thanks,
Juha
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
