Hi all, I have previously sent this message to Patrick Boettcher, but I have not received any answer. On his homepage I have read the address of this mailing list. So, I am here. :-) The problem: My TV tuner is EC300 DVB-T TV Tuner Yuan High-Tech Development. I ave purchased the notebook ith this tuner in bundle. My kernel is 2.19.1. My Linux is Slackware 11.0. The firmware files are in /lib/firmware directory. I have followed Patrick HomePage instruction for the cam integrated in my notebook HP dv9095, but when I launch "dvbscan it-Milano" it say: Unable to query frontend status I have tryed and re-tryed with modules inside the kernel( 2.19.1), with modules downloaded with hg, and many other things, but nothing! :-( And still, all seem work fine!! The tuner is recognized by the kernel, but dvbscan, tvtime, kdetv not see it! E.g. if i pass to tvtime the command: tvtime -d /dev/dvb/adapter0/dvr0 -f europe it say me: videoinput: Cannot open capture device /dev/dvb/adapter0/dvr0: Operation not supported and I have tryed with demuxer0 and all device under the path: /dev/dvb/adapter0 :-( I have used these firmware: dvb-usb-dibusb-6.0.0.8.fw dvb-usb-dibusb-5.0.0.11.fw dvb-usb-dibusb-an2235-01.fw I have try to upload my original drivers of windows on Patrick Homepage (http://www.wi-bw.tfh-wildau.de/~pboettch/home/index.php?site=dvb-usb-firmware) for extract the firmware, but that script say: file unknow, impossible to extract the firmware. Became root, I have tryed to load one firmware with the command: sysctl -w kernel.hotplug=/sbin/udevsend but, nothing to do! :-( I think which the firmware is not right for my device :-( However, if you can, I send to you my original drivers or you can say me how to I can extract the firmware? Follow technical notes of kernel & my usb 2.0 tv tuner: lsusb: Bus 3 Device 1: ID 0000:0000 Bus 2 Device 1: ID 0000:0000 Bus 2 Device 2: ID 0f62:1001 Acrox Technologies Co., Ltd Bus 1 Device 5: ID 10b8:0bc7 DiBcom DiBcom USB2.0 DVB-T reference design (MOD3000P) (warm) Bus 1 Device 1: ID 0000:0000 Bus 1 Device 3: ID 0c45:62c0 Microdia Bus 4 Device 1: ID 0000:0000 Bus 5 Device 1: ID 0000:0000 dmesg: usbcore: registered new interface driver dvb_usb_vp7045 usbcore: registered new interface driver dvb_usb_dtt200u usbcore: registered new interface driver dvb_usb_dibusb_mb usbcore: registered new interface driver dvb_usb_dibusb_mc usbcore: registered new interface driver dvb_usb_digitv usbcore: registered new interface driver dvb_usb_a800 usbcore: registered new interface driver dvb_usb_nova_t_usb2 usbcore: registered new interface driver dvb_usb_umt_010 usb 1-8: new high speed USB device using ehci_hcd and address 4 usb 1-8: configuration #1 chosen from 1 choice dvb-usb: found a 'DiBcom USB2.0 DVB-T reference design (MOD3000P)' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (DiBcom USB2.0 DVB-T reference design (MOD3000P)). DVB: registering frontend 0 (DiBcom 3000MC/P)... MT2060: successfully identified (IF1 = 1230) input: IR-receiver inside an USB DVB receiver as /class/input/input3 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: DiBcom USB2.0 DVB-T reference design (MOD3000P) successfully initialized and connected. input: Yuan Digital TV as /class/input/input4 input: USB HID v1.11 Device [Yuan Digital TV] on usb-0000:00:1d.7-8 dvb-usb: bulk message failed: -71 (1/0) dvb-usb: bulk message failed: -71 (1/0) usb 1-8: USB disconnect, address 4 dvb-usb: DiBcom USB2.0 DVB-T reference design (MOD3000P) successfully deinitialized and disconnected. usb 1-8: new high speed USB device using ehci_hcd and address 5 usb 1-8: configuration #1 chosen from 1 choice dvb-usb: found a 'DiBcom USB2.0 DVB-T reference design (MOD3000P)' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (DiBcom USB2.0 DVB-T reference design (MOD3000P)). DVB: registering frontend 0 (DiBcom 3000MC/P)... MT2060: successfully identified (IF1 = 1230) input: IR-receiver inside an USB DVB receiver as /class/input/input5 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: DiBcom USB2.0 DVB-T reference design (MOD3000P) successfully initialized and connected. input: Yuan Digital TV as /class/input/input6 input: USB HID v1.11 Device [Yuan Digital TV] on usb-0000:00:1d.7-8 ------------------------------------------------------------------------------------------------------ MAYBE IMPORTANT: I not see "..demodulator ..." which I see in the output of Patrick home page. ------------------------------------------------------------------------------------------------------ Kernel modules(firmware_class,ic2-core,bit-banging and ic2-dev are static in the kernel) and I have tryed to load all others modules too: dvb_usb_umt_010 5120 0 dvb_usb_nova_t_usb2 5252 0 dvb_usb_a800 4932 0 dvb_usb_digitv 6916 0 dvb_usb_dibusb_mc 4864 0 dvb_usb_dibusb_mb 11136 0 dvb_usb_dibusb_common 7620 5 dvb_usb_umt_010,dvb_usb_nova_t_usb2,dvb_usb_a800,dvb_usb_dibusb_mc,dvb_usb_dibusb_mb dvb_usb_dtt200u 11524 0 dvb_usb_vp7045 8324 0 dvb_usb 19084 9 dvb_usb_umt_010,dvb_usb_nova_t_usb2,dvb_usb_a800,dvb_usb_digitv,dvb_usb_dibusb_mc,dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb_dtt200u,dvb_usb_vp7045 nxt6000 6788 0 mt352 5828 0 mt2060 4612 1 dib3000mc 10884 2 dvb_usb_dibusb_common dibx000_common 3524 1 dib3000mc dib3000mb 11008 1 dvb_usb_dibusb_mb dvb_pll 11716 5 dvb_usb_umt_010,dvb_usb_digitv,dvb_usb_dibusb_mb,dvb_usb_dibusb_common,dvb_usb dvb_core 65896 1 dvb_usb nvidia 6818292 22 sg 20376 0 any help will be much appreciated! Best Regards to all Paolo p.s. Many excusme for my bad english! _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
