Am Donnerstag, den 04.01.2007, 01:07 -0500 schrieb CityK: > Dwaine Garden wrote: > > John wrote: > >> I'm having a problem getting the NTSC part of > >> the card working. ... I can't figure out why it created the video0 socket yet > >> it can't detect any signal. > > > > My understanding is the Dual decoder functionality is disabled for now > > for the moment. > > > > Jan 1 05:34:16 mythtv kernel: saa7130/34: v4l2 driver version 0.2.14 > > loaded > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: found at 0000:00:0a.0, rev: > > 240, irq: 19, latency: 32, mmio: 0xe6000000 > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: subsystem: 17de:7350, > > board: Kworld ATSC110 [card=90,autodetected] > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: board init: gpio is 100 > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: Kworld ATSC110: dual > > saa713x broadcast decoders > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: Sorry, none of the inputs > > to this chip are supported yet. > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: Dual decoder functionality > > is disabled for now, use the other chip. > > Jan 1 05:34:16 mythtv kernel: input: Kworld ATSC110 as > > /class/input/input9 > > Jan 1 05:34:16 mythtv kernel: ir-kbd-i2c: Kworld ATSC110 detected at > > i2c-0/0-0030/ir0 [saa7133[0]] > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 00: de 17 50 73 > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 10: ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 20: ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 40: ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device video0 [v4l2] > > Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device vbi0 > > Okay, I'll bite: > > - why is the dmesg output for this uni-saa713x device falsely reporting > that it has two decoders ??? > > - From the dmesg output, I'm not clear as to whether the enabling of two > decoders is actually being attempted or whether the output message is > just either (a) just poorly worded or (b) being falsely generated (see > my first remark immediately above) .... In any respect, just how is the > absence of an (oddly assumed) second decoder affecting the setup of the > analog TV-in support on the (actual sole) onboard decoder ??? > > Can anyone shed light on these matters? > Hi, it was just a typo adding the card to this case statement instead to the above one for the i2c remotes in saa7134_board_init1 saa7134-cards.c. It is already fixed in the followup patch and really did nothing else than the print out. I pointed to it on the video4linux-list, but forgot the copy for the linux-dvb ML. Cheers, Hermann _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
