----- Forwarded Message ----
From: Dwaine Garden <dwainegarden@xxxxxxxxxx>
To: John <jharitos@xxxxxxxxx>
Sent: Monday, January 1, 2007 6:10:05 AM
Subject: Re: [linux-dvb] Problem with Kworld ATSC-110
From: Dwaine Garden <dwainegarden@xxxxxxxxxx>
To: John <jharitos@xxxxxxxxx>
Sent: Monday, January 1, 2007 6:10:05 AM
Subject: Re: [linux-dvb] Problem with Kworld ATSC-110
My understanding is the Dual decoder functionality is disabled for now for the moment.
Jan 1 05:34:16 mythtv kernel: saa7130/34: v4l2 driver version 0.2.14 loaded
Jan 1 05:34:16 mythtv kernel: saa7133[0]: found at 0000:00:0a.0, rev: 240, irq: 19, latency: 32, mmio: 0xe6000000
Jan 1 05:34:16 mythtv kernel: saa7133[0]: subsystem: 17de:7350, board: Kworld ATSC110 [card=90,autodetected]
Jan 1 05:34:16 mythtv kernel: saa7133[0]: board init: gpio is 100
Jan 1 05:34:16 mythtv kernel: saa7133[0]: Kworld ATSC110: dual saa713x broadcast decoders
Jan 1 05:34:16 mythtv kernel: saa7133[0]: Sorry, none of the inputs to this chip are supported yet.
Jan 1 05:34:16 mythtv kernel: saa7133[0]: Dual decoder functionality is disabled for now, use the other chip.
Jan 1 05:34:16 mythtv kernel: input: Kworld ATSC110 as /class/input/input9
Jan 1 05:34:16 mythtv kernel: ir-kbd-i2c: Kworld ATSC110 detected at i2c-0/0-0030/ir0 [saa7133[0]]
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 00: de 17 50 73 ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device video0 [v4l2]
Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device vbi0
Jan 1 05:34:24 mythtv kernel: nxt200x: NXT2004 Detected
Jan 1 05:34:24 mythtv kernel: DVB: registering new adapter (saa7133[0]).
Jan 1 05:34:24 mythtv kernel: DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)...
Jan 1 05:34:37 mythtv kernel: nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)...
Jan 1 05:34:37 mythtv kernel: nxt2004: Waiting for firmware upload(2)...
Jan 1 05:34:38 mythtv kernel: nxt2004: Firmware upload complete
Jan 1 05:34:16 mythtv kernel: saa7130/34: v4l2 driver version 0.2.14 loaded
Jan 1 05:34:16 mythtv kernel: saa7133[0]: found at 0000:00:0a.0, rev: 240, irq: 19, latency: 32, mmio: 0xe6000000
Jan 1 05:34:16 mythtv kernel: saa7133[0]: subsystem: 17de:7350, board: Kworld ATSC110 [card=90,autodetected]
Jan 1 05:34:16 mythtv kernel: saa7133[0]: board init: gpio is 100
Jan 1 05:34:16 mythtv kernel: saa7133[0]: Kworld ATSC110: dual saa713x broadcast decoders
Jan 1 05:34:16 mythtv kernel: saa7133[0]: Sorry, none of the inputs to this chip are supported yet.
Jan 1 05:34:16 mythtv kernel: saa7133[0]: Dual decoder functionality is disabled for now, use the other chip.
Jan 1 05:34:16 mythtv kernel: input: Kworld ATSC110 as /class/input/input9
Jan 1 05:34:16 mythtv kernel: ir-kbd-i2c: Kworld ATSC110 detected at i2c-0/0-0030/ir0 [saa7133[0]]
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 00: de 17 50 73 ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device video0 [v4l2]
Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device vbi0
Jan 1 05:34:24 mythtv kernel: nxt200x: NXT2004 Detected
Jan 1 05:34:24 mythtv kernel: DVB: registering new adapter (saa7133[0]).
Jan 1 05:34:24 mythtv kernel: DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)...
Jan 1 05:34:37 mythtv kernel: nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)...
Jan 1 05:34:37 mythtv kernel: nxt2004: Waiting for firmware upload(2)...
Jan 1 05:34:38 mythtv kernel: nxt2004: Firmware upload complete
----- Original Message ----
From: John <jharitos@xxxxxxxxx>
To: linux-dvb@xxxxxxxxxxx
Sent: Sunday, December 31, 2006 10:49:25 PM
Subject: Problem with Kworld ATSC-110
From: John <jharitos@xxxxxxxxx>
To: linux-dvb@xxxxxxxxxxx
Sent: Sunday, December 31, 2006 10:49:25 PM
Subject: Problem with Kworld ATSC-110
Hello Everyone,
I hope this mailing list is the correct place to ask
this question. I bought a Kworld ATSC-110 DVB tuner
card and I'm having a problem getting the NTSC part of
the card working. I installed the nxt2004 file to my
lib/firmware directory. I also added modprobe
saa7134-dvb to my rc.local (also tried my modules.conf
file)file. A dmesg shows the card was detected at boot
with card 90 and tuner 68. My distro creates the
/dev/video0 socket and the /dev/dvb/adapter0 socket. I
can scan OTA channels with the top RF input but I
can't get any NTSC signal from the RF bottom input. I
can't figure out why it created the video0 socket yet
it can't detect any signal. Any help or pointers would
be appreciated. I'm using kernel 2.6.17.14.
Thanks
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I hope this mailing list is the correct place to ask
this question. I bought a Kworld ATSC-110 DVB tuner
card and I'm having a problem getting the NTSC part of
the card working. I installed the nxt2004 file to my
lib/firmware directory. I also added modprobe
saa7134-dvb to my rc.local (also tried my modules.conf
file)file. A dmesg shows the card was detected at boot
with card 90 and tuner 68. My distro creates the
/dev/video0 socket and the /dev/dvb/adapter0 socket. I
can scan OTA channels with the top RF input but I
can't get any NTSC signal from the RF bottom input. I
can't figure out why it created the video0 socket yet
it can't detect any signal. Any help or pointers would
be appreciated. I'm using kernel 2.6.17.14.
Thanks
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb