Dwaine Garden wrote: > John wrote: >> I'm having a problem getting the NTSC part of >> the card working. ... I can't figure out why it created the video0 socket yet >> it can't detect any signal. > > My understanding is the Dual decoder functionality is disabled for now > for the moment. > > Jan 1 05:34:16 mythtv kernel: saa7130/34: v4l2 driver version 0.2.14 > loaded > Jan 1 05:34:16 mythtv kernel: saa7133[0]: found at 0000:00:0a.0, rev: > 240, irq: 19, latency: 32, mmio: 0xe6000000 > Jan 1 05:34:16 mythtv kernel: saa7133[0]: subsystem: 17de:7350, > board: Kworld ATSC110 [card=90,autodetected] > Jan 1 05:34:16 mythtv kernel: saa7133[0]: board init: gpio is 100 > Jan 1 05:34:16 mythtv kernel: saa7133[0]: Kworld ATSC110: dual > saa713x broadcast decoders > Jan 1 05:34:16 mythtv kernel: saa7133[0]: Sorry, none of the inputs > to this chip are supported yet. > Jan 1 05:34:16 mythtv kernel: saa7133[0]: Dual decoder functionality > is disabled for now, use the other chip. > Jan 1 05:34:16 mythtv kernel: input: Kworld ATSC110 as > /class/input/input9 > Jan 1 05:34:16 mythtv kernel: ir-kbd-i2c: Kworld ATSC110 detected at > i2c-0/0-0030/ir0 [saa7133[0]] > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 00: de 17 50 73 > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 10: ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 20: ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 40: ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff > Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device video0 [v4l2] > Jan 1 05:34:16 mythtv kernel: saa7133[0]: registered device vbi0 Okay, I'll bite: - why is the dmesg output for this uni-saa713x device falsely reporting that it has two decoders ??? - From the dmesg output, I'm not clear as to whether the enabling of two decoders is actually being attempted or whether the output message is just either (a) just poorly worded or (b) being falsely generated (see my first remark immediately above) .... In any respect, just how is the absence of an (oddly assumed) second decoder affecting the setup of the analog TV-in support on the (actual sole) onboard decoder ??? Can anyone shed light on these matters? _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
