Manu Abraham wrote:
There isn't any documentation on the Mantis chip. The vendor asked the
chip manufacturer for the documentation, what the manufacturer said was
that they were too late to ask for any documentation. The driver was
written by having a discussion with the chip manufacturer. (There were
some chinese photograph style documentation though, which created an
even more confusion)
Even if they made any documentation, it would surely have been under NDA
only.
Ok, thanks for enlighten me a bit.
I have been looking at bit (not much) at the code, and would like to
know if there is a simple way of finding out if the
struct zl10353_config mantis_vp3030_config = {
.demod_address = 0x0f,
};
is pointing at the right adress?
It seems like the only way (besides failure to allocate memory) of
having the 'zl10353_attach' function to fail (in mantis_dvb.c) is if we
are failing to talk to the i2c bus and verify that it actually has a
zl10353. Is there something special that needs to be done before calling
'i2c_transfer' to initiate the i2c bus properly?
# i2cdetect -l
...
i2c-2 smbus Mantis I2C Non-I2C SMBus adapter
...
Can I use 'i2cdump 2 0x0f b' to look for the identifier that the call to
'zl10353_read_register' was supposed to find or will that possibly
destroy something?
What else can I do to help out?
/Andreas
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb