Michel Verbraak wrote: > Manu Abraham schreef: >> Michel Verbraak wrote: >> >>> Joep, >>> >>> Within windows with the Twinhan Software scanning for the dutch channels >>> does not work either. It does not find any dutch channels. >>> >>> >> >> Hopefully the Horizontal switching issue is fixed. Don't have a rotor at >> my side to test the same. >> Please do test whether it works without the rotor, initially. >> >> Regards, >> Manu >> > Manu, > > Testing without rotor. > scan does not find any channels. Output is still: > bash-3.1$ scan /usr/share/dvb-apps/dvb-s/Astra-19.2E > channels.conf > scanning /usr/share/dvb-apps/dvb-s/Astra-19.2E > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 12551500 V 22000000 5 >>>> tune to: 12551:v:0:22000 > WARNING: >>> tuning failed!!! >>>> tune to: 12551:v:0:22000 (tuning failed) > WARNING: >>> tuning failed!!! > ERROR: initial tuning failed > dumping lists (0 services) > Done. > > If I try szap on an old channels.conf file I do get a FE_HAS_LOCK now > every time. Previously this was not stable and most of the time no lock. > If I try "szap -r" I do not get any output on /dev/dvb/adapter0/dvr0. In > dmesg it tells me NO SIGNAL. > > If you want any log messages please tell me I will try to provide them > as good as possible. Can you please provide a log with modprobe mb86a16 verbose=4 and modprobe mantis verbose=4 for on one complete cycle of a module load and a szap to a known channel Thanks, Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb