>You need to have the mpeg encoder set up in mythtv as a v4l2 mpeg encoder.
>I have been told that mythtv has already been updated to use the v4l2
>mpeg encoding api -- it SHOULD work fine.
>About the sound... Can you tell me which inputs have sound and which do
>not?
>(TV, radio, composite) ... I know what's wrong with the sound input, and I
>can
>send you a patch to test.
>For instance, this should fix sound for TV, but I need you to verify that
>it
>works before I have it added to the repository:
>--- cx88.orig/linux/drivers/media/video/cx88/cx88-cards.c
>+++ cx88/linux/drivers/media/video/cx88/cx88-cards.c
>@@ -1341,7 +1341,6 @@
>
> .vmux = 0,
> .gpio0 = 0xe780,
> .extadc = 1,
> },{
> .type = CX88_VMUX_COMPOSITE1,
> .vmux = 1,
>
>...if sound is broken on the other inputs, then also remove that ".extadc =
>1"
>from that input line and give it a test. Please let me know what happens.
>Cheers,
>Mike
> No worries - I shall check it out tomorrow arvo after work.
Ok - I hand edited cx88-cards.c (bit of a newbie - could someone give me a
quick example of the command to correctly patch in this case) - did a make
distclean and rebuilt the modules. I still get no audio but a perfectly good
picture. I am testing using mplayer - mplayer /dev/video2 -vo xv -ao ALSA
Then I tried v4l2-ctrl -i1 and tested in the same way. No audio on the
composite input either - picture works fine.
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
