Hello,
I have HVR 1300
I have get TV with tvtime but i must add this
arecord -D hw:2,0 -c 2 -r 48000 -f S16_LE -t wav | aplay -
For numerique TV I use Kaffeine.
On time on two the tda9887 is not load.
I get last module the 26/11/2006 at 12:00:00
>>>>>>>>>>>>>>>>>>>
i have this in messages:
Nov 23 17:06:35 www kernel: cx2388x v4l2 driver version 0.0.6 loaded
Nov 23 17:06:35 www kernel: PCI: Enabling device 0000:05:01.0 (0000 -> 0002)
Nov 23 17:06:35 www kernel: ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI
17 (level, low) -> IRQ 177
Nov 23 17:06:35 www kernel: CORE cx88[0]: subsystem: 0070:9601, board:
Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
Nov 23 17:06:35 www kernel: TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
Nov 23 17:06:35 www kernel: wm8775 1-001b: chip found @ 0x36 (cx88[0])
Nov 23 17:06:35 www kernel: tuner 1-0043: I2C RECV = e1 fe fe e0 e0 fe
e0 e0 fe fe e0 e0 fe e0 e0 fe
Nov 23 17:06:35 www kernel: tuner 1-0043: chip found @ 0x86 (cx88[0])
Nov 23 17:06:35 www kernel: tda9887 1-0043: tda988[5/6/7] found @ 0x43
(tuner)
Nov 23 17:06:35 www kernel: tuner 1-0061: I2C RECV = 70 70 70 70 70 70
70 70 70 70 70 70 70 70 70 70
Nov 23 17:06:35 www kernel: tuner 1-0061: chip found @ 0xc2 (cx88[0])
Nov 23 17:06:35 www kernel: tuner 1-0061: type set to 63 (Philips
FMD1216ME MK3 Hybrid Tuner)
Nov 23 17:06:35 www kernel: tuner 1-0063: I2C RECV = 00 00 00 00 00 00
00 00 00 00 00 04 00 00 00 00
Nov 23 17:06:35 www kernel: tuner 1-0063: chip found @ 0xc6 (cx88[0])
<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>
And sometime
Nov 26 12:12:54 www kernel: cx2388x v4l2 driver version 0.0.6 loaded
Nov 26 12:12:54 www kernel: PCI: Enabling device 0000:05:01.0 (0000 -> 0002)
Nov 26 12:12:54 www kernel: ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI
17 (level, low) -> IRQ 177
Nov 26 12:12:54 www kernel: CORE cx88[0]: subsystem: 0070:9601, board:
Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
Nov 26 12:12:54 www kernel: TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
Nov 26 12:12:54 www kernel: wm8775 1-001b: chip found @ 0x36 (cx88[0])
Nov 26 12:12:54 www kernel: tuner 1-0061: I2C RECV = 7c 7c 7c 7c 7c 7c
7c 7c 7c 7c 7c 7c 7c 7c 7c 7c
Nov 26 12:12:54 www kernel: tuner 1-0061: chip found @ 0xc2 (cx88[0])
Nov 26 12:12:54 www kernel: tuner 1-0061: type set to 63 (Philips
FMD1216ME MK3 Hybrid Tuner)
Nov 26 12:12:54 www kernel: tuner 1-0063: I2C RECV = 00 00 00 00 00 00
00 00 00 00 00 04 00 00 00 00
Nov 26 12:12:54 www kernel: tuner 1-0063: chip found @ 0xc6 (cx88[0])
Nov 26 12:12:54 www kernel: tveeprom 1-0050: Hauppauge model 96019, rev
C6A0, serial# 776475
Nov 26 12:12:54 www kernel: tveeprom 1-0050: MAC address is
00-0D-FE-0B-D9-1B
Nov 26 12:12:54 www kernel: tveeprom 1-0050: tuner model is Philips
FMD1216ME (idx 100, type 63)
Nov 26 12:12:54 www kernel: tveeprom 1-0050: TV standards PAL(B/G)
PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
in the first case i have TV ana
in the second i have not TV ana.
How i can forced tda9887
For radio i have nothing OK
When i try listen i have this errors :
>>>>>>>>>>>>>>>>>>>>>>>>>>
Nov 26 12:14:38 www kernel: tda9887 1-0043: configure for: Radio Mono
Nov 26 12:14:38 www kernel: tda9887 1-0043: writing: b=0x8c c=0x30 e=0x3d
Nov 26 12:14:38 www kernel: tda9887 1-0043: i2c i/o error: rc == -121
(should be 4)
Nov 26 12:14:38 www kernel: tda9887 1-0043: configure for: Radio Mono
Nov 26 12:14:38 www kernel: tda9887 1-0043: writing: b=0x8c c=0x30 e=0x3d
Nov 26 12:14:38 www kernel: tda9887 1-0043: i2c i/o error: rc == -121
(should be 4)
Nov 26 12:14:38 www kernel: tuner 1-0061: i2c i/o error: rc == -121
(should be 4)
Nov 26 12:14:38 www kernel: cx22702_i2c_gate_ctrl(0)
Nov 26 12:14:38 www kernel: cx22702_readreg: readreg error (ret == -121)
Nov 26 12:14:38 www kernel: cx22702_writereg: writereg error (reg ==
0x0d, val == 0x01, ret == -121)
Nov 26 12:14:38 www kernel: cx22702_i2c_gate_ctrl(1)
Nov 26 12:14:38 www kernel: cx22702_readreg: readreg error (ret == -121)
<<<<<<<<<<<<<<<<<<<<<<<<<<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Here All in messages when i load modules :
Nov 26 12:13:44 www kernel: cx2388x v4l2 driver version 0.0.6 loaded
Nov 26 12:13:44 www kernel: PCI: Enabling device 0000:05:01.0 (0000 -> 0002)
Nov 26 12:13:44 www kernel: ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI
17 (level, low) -> IRQ 177
Nov 26 12:13:44 www kernel: CORE cx88[0]: subsystem: 0070:9601, board:
Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected]
Nov 26 12:13:44 www kernel: TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
Nov 26 12:13:45 www kernel: wm8775 1-001b: chip found @ 0x36 (cx88[0])
Nov 26 12:13:45 www kernel: tuner 1-0043: I2C RECV = 8f 8e 8e 8e 8e 8e
8e 8e 8e 8e 8e 8e 8e 8e 8e 8e
Nov 26 12:13:45 www kernel: tuner 1-0043: chip found @ 0x86 (cx88[0])
Nov 26 12:13:45 www kernel: tda9887 1-0043: tda988[5/6/7] found @ 0x43
(tuner)
Nov 26 12:13:45 www kernel: tuner 1-0061: I2C RECV = 70 70 70 70 70 70
70 70 70 70 70 70 70 70 70 70
Nov 26 12:13:45 www kernel: tuner 1-0061: chip found @ 0xc2 (cx88[0])
Nov 26 12:13:45 www kernel: tuner 1-0061: type set to 63 (Philips
FMD1216ME MK3 Hybrid Tuner)
Nov 26 12:13:45 www kernel: tuner 1-0063: I2C RECV = 00 00 00 00 00 00
00 00 00 00 00 04 00 00 00 00
Nov 26 12:13:45 www kernel: tuner 1-0063: chip found @ 0xc6 (cx88[0])
Nov 26 12:13:45 www kernel: tveeprom 1-0050: Hauppauge model 96019, rev
C6A0, serial# 776475
Nov 26 12:13:45 www kernel: tveeprom 1-0050: MAC address is
00-0D-FE-0B-D9-1B
Nov 26 12:13:45 www kernel: tveeprom 1-0050: tuner model is Philips
FMD1216ME (idx 100, type 63)
Nov 26 12:13:45 www kernel: tveeprom 1-0050: TV standards PAL(B/G)
PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
Nov 26 12:13:45 www kernel: tveeprom 1-0050: audio processor is CX882
(idx 33)
Nov 26 12:13:45 www kernel: tveeprom 1-0050: decoder processor is CX882
(idx 25)
Nov 26 12:13:45 www kernel: tveeprom 1-0050: has radio, has IR receiver,
has IR transmitter
Nov 26 12:13:45 www kernel: cx88[0]: hauppauge eeprom: model=96019
Nov 26 12:13:45 www kernel: input: cx88 IR (Hauppauge WinTV-HVR130 as
/class/input/input15
Nov 26 12:13:45 www kernel: cx88[0]/0: found at 0000:05:01.0, rev: 5,
irq: 177, latency: 32, mmio: 0xf9000000
Nov 26 12:13:45 www kernel: cx88[0]/0: registered device video0 [v4l2]
Nov 26 12:13:45 www kernel: cx88[0]/0: registered device vbi0
Nov 26 12:13:45 www kernel: cx88[0]/0: registered device radio0
Nov 26 12:13:45 www kernel: tda9887 1-0043: configure for: NTSC-M
Nov 26 12:13:45 www kernel: tda9887 1-0043: writing: b=0x14 c=0x30 e=0x44
Nov 26 12:13:45 www kernel: cx2388x cx88-mpeg Driver Manager version
0.0.6 loaded
Nov 26 12:13:45 www kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Nov 26 12:13:45 www kernel: PCI: Enabling device 0000:05:01.2 (0000 -> 0002)
Nov 26 12:13:45 www kernel: ACPI: PCI Interrupt 0000:05:01.2[A] -> GSI
17 (level, low) -> IRQ 177
Nov 26 12:13:45 www kernel: cx88[0]/2: found at 0000:05:01.2, rev: 5,
irq: 177, latency: 32, mmio: 0xfa000000
Nov 26 12:13:45 www kernel: cx2388x alsa driver version 0.0.6 loaded
Nov 26 12:13:45 www kernel: PCI: Enabling device 0000:05:01.1 (0000 -> 0002)
Nov 26 12:13:45 www kernel: ACPI: PCI Interrupt 0000:05:01.1[A] -> GSI
17 (level, low) -> IRQ 177
Nov 26 12:13:45 www kernel: cx88[0]/1: CX88x/0: ALSA support for cx2388x
boards
Nov 26 12:13:45 www kernel: cx2388x dvb driver version 0.0.6 loaded
Nov 26 12:13:45 www kernel: cx8802_register_driver() ->registering
driver type=dvb access=shared
Nov 26 12:13:45 www kernel: CORE cx88[0]: subsystem: 0070:9601, board:
Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56]
Nov 26 12:13:45 www kernel: cx88[0]/2: cx2388x based dvb card
Nov 26 12:13:45 www kernel: cx22702_i2c_gate_ctrl(1)
Nov 26 12:13:45 www kernel: cx22702_i2c_gate_ctrl(0)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Merci pour votre aide .....
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb