Hello,
Didier Leclere wrote:
Hello,
I have HVR 1300
I have the HVR3000 (Similar card I think, but with DVB-S as well)
On time on two the tda9887 is not load.
I have a similar problem in that the tda9887 is not detected first time
round. But if I run rmmod tuner && modprobe tuner then it is detected
2nd, 3rd, 4th, .... time I load the tuner module.
> I have get TV with tvtime but i must add this
> arecord -D hw:2,0 -c 2 -r 48000 -f S16_LE -t wav | aplay -
>
> For numerique TV I use Kaffeine.
When I use arecord -D hw:1,0 -c2 -r 48000 -f S16_LE -t wav |aplay -D
hw:0,0 - I get only static noise (as if the channel isn't tuned in
correctly) even though I have a picture. This is when using analog TV.
Below is my dmesg and some errors (I think) or maybe debugging info from
when I try to play the audio.
I'm using Steve Toths dvb tree from http://linuxtv.org/hg/~stoth/hvr3000
I'd really like to get audio working properly on this card if someone
can offer any advice :-)
Thanks,
Robert.
Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
CORE cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000
TriMode Analog/DVB-S/DVB-T [card=53,autodetected]
TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
tuner 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0061: chip found @ 0xc2 (cx88[0])
tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 1-0063: chip found @ 0xc6 (cx88[0])
tveeprom 1-0050: Hauppauge model 14109, rev B3A0, serial# 743815
tveeprom 1-0050: MAC address is 00-0D-FE-0B-59-87
tveeprom 1-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K)
ATSC/DVB Digital (eeprom 0xf4)
tveeprom 1-0050: audio processor is CX882 (idx 33)
tveeprom 1-0050: decoder processor is CX882 (idx 25)
tveeprom 1-0050: has radio, has IR remote
cx88[0]: hauppauge eeprom: model=14109
input: cx88 IR (Hauppauge WinTV-HVR300 as /class/input/input11
cx88[0]/0: found at 0000:00:0c.0, rev: 5, irq: 17, latency: 64, mmio:
0xf6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:00:0c.2[A] -> GSI 17 (level, low) -> IRQ 17
cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 17, latency: 64, mmio:
0xf8000000
cx8802_probe() allocating 2 frontends
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 0070:1402, board: Hauppauge WinTV-HVR3000
TriMode Analog/DVB-S/DVB-T [card=53]
cx88[0]/2: cx2388x based dvb card
dvb: videobuf_dvb_register_adapter()
DVB: registering new adapter (cx88[0]).
dvb: videobuf_dvb_register_adapter() returns 0
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
DVB: registering frontend 0 (Conexant CX24123/CX24109)...
cx8802_register_driver() returns 0
tuner 1-0063: chip found @ 0xc6 (cx88[0])
tuner 1-0063: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
cx2388x alsa driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:00:0c.1[A] -> GSI 17 (level, low) -> IRQ 17
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1000] dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1000] dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1001] dn_risci1* dn_sync*
cx88[0]: irq aud [0x1000] dn_sync*
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
