Sven Lankes wrote: > On Fri, Nov 24, 2006 at 02:13:11PM +0000, Andrew Lyon wrote: > >>> I'll take my CAM and the smartcard to the dealer I bought the stuff at >>> and see if he can test. > >> Have you checked if the cam menu has a setting to set your STB serial >> number? With my cam (t.rex) I had to enter the box serial number >> before I could decrypt certain channels. >> gnutv has a option to enter cam menu, there might be other interesting >> options in there too, I dont use that as I have a CAS Interface which >> has a pcmcia slot and can host a cam, as well as being able to update >> its firmware using a fake smartcard. > > I had never heard of the CAM menu before. > > This is what I get from gnutv -cammenu > > CAM Menu string: Cryptoworks > ------------------------------ > Cryptoworks > > 0. Quit menu > 1. Gesteckte Smartkarte wird nicht unterstützt ! > 2. ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E > Drücken Sie OK > Enter option: 0 > > (Translates to: Smartcard not supported) > > That might well be my problem ;) > > So it's possible that the dealer sold me a non-working CAM ... It means your (subscription card) Smartcard is unsupported by the CAM (PCMCIA module). The CAM does work indeed. Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb