No change here either I'm afraid. Dave On 21/11/06 12:37, "Steven Cockeram" <steven.cockeram@xxxxxxxxx> wrote: > >>> Done, unfortunately it's not made any difference I put 5000ms in it to be >>> sure. >>> It has increased the time between these messages but the right amount so I >>> guess it is sleeping correctly? >>> >>> [ 130.491217] dib0700: firmware started successfully. >>> [ 135.492018] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state. >>> >> >> Can you please try to extend the delays in stk7700p_frontend_attach >> between the GPIO-control-sequence? >> >> Can you also change the call of dib0700_ctrl_clock to >> dib0700_ctrl_clock(adap->dev, 72, 0); ? >> >> Patrick. >> >> -- >> Mail: patrick.boettcher@xxxxxxx >> WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ >> >> > > Patrick, > > > I increased all the delays by a factor of 10, and updated the > dib0700_ctrl_clock from 1 to 0, but I get the same no frontend and the > same output from dmesg. > > DVB: registering new adapter (Hauppauge Nova-T Stick). > I2C read failed on address 9 > I2C read failed on address 40 > DiB7000P:-D- DiB7000PC not detected > I2C read failed on address 9 > DiB7000M:i2c read error on 896 > DiB7000M:-E- DiB7000M: wrong Vendor ID (read=0x400d) > > > Steve > > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
