Done, unfortunately it's not made any difference I put 5000ms in it to be
sure.
It has increased the time between these messages but the right amount so I
guess it is sleeping correctly?
[ 130.491217] dib0700: firmware started successfully.
[ 135.492018] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
Can you please try to extend the delays in stk7700p_frontend_attach
between the GPIO-control-sequence?
Can you also change the call of dib0700_ctrl_clock to
dib0700_ctrl_clock(adap->dev, 72, 0); ?
Patrick.
--
Mail: patrick.boettcher@xxxxxxx
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
Patrick,
I increased all the delays by a factor of 10, and updated the
dib0700_ctrl_clock from 1 to 0, but I get the same no frontend and the
same output from dmesg.
DVB: registering new adapter (Hauppauge Nova-T Stick).
I2C read failed on address 9
I2C read failed on address 40
DiB7000P:-D- DiB7000PC not detected
I2C read failed on address 9
DiB7000M:i2c read error on 896
DiB7000M:-E- DiB7000M: wrong Vendor ID (read=0x400d)
Steve
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
