I am certainly willing to be a tester. Markus Rechberger wrote: > Michael, a tester for the driver you have ;-) > > We have a driver for this, but not released yet.. I'm not sure how the > quality will be either > > these em28xx devices should be around in US: > > 1. Hauppauge -em2883 (NTSC(tvp5150)/ATSC(lgdt3303)/extra > usbaudio(ep 0x83)) > 2. Pinnacle - em2883 (NTSC(tvp5150)/ATSC(lgdt3303) > 3. elgato - em2883 (NTSC(tvp5150)/ATSC(Samsung) > > cheers, > Markus > > On 11/21/06, Erik Meitner <emeitner@xxxxxxxxx> wrote: >> Markus Rechberger wrote: >> > On 11/17/06, Erik Meitner <emeitner@xxxxxxxxx> wrote: >> >> I have a Pinnacle PCTV HD Pro Stick that I hoped would work with the >> >> current >> >> drivers. My initial investigation and work shows that, although it is >> >> not >> >> currently plug-n-play, it is similar enough to supported hardware >> >> that it >> >> may require little work. >> >> >> >> USB ID: 2304:0227. >> >> Device identifies itself as a "PCTV 800e". >> >> It appears to be based on an em2870. >> >> Has an MT2060 tuner. >> >> Output of lsusb is attached. >> > >> > Seems like I skipped this part in mind when I wrote the first 2 emails. >> > >> > Could you open your device and write down the ICs which are used? >> > The MT2060 is a tuner >> > the em2870 is a USB DTV Bridge (without analogue TV support) >> > The dtv demodulator is a ??? >> > >> > I read that this is a Hybrid NTSC/ATSC stick ... >> > The Product Specs says fully compatible with NTSC, PAL, SECAM, DAVIC, >> > DVB-C, DOCSIS 1.0, 1.1 and 2.0 .. >> > >> > The link you sent on the other side says it's a hybrid device. >> > >> > Please clear this up what it is for real. >> > >> > Markus >> > >> The USB stick consists of two boards: one with the USB and A/V >> connectors, the other with the RF connector. The two boards are >> joined(soldered) together with two 7 pin headers, one on each side of >> the board. I am unwilling to unsolder the pins and risk damaging the >> device, so whatever is inside the "sandwich" is still unknown. >> >> Chips visible: >> Frontend: lgdt3303 >> Tuner: xc3028ACQ >> There is also a CPLD: lc4032v >> >> First, I'll be putting collected information here: >> http://erik.wanderings.us/pub/PCTVHDPro/ >> >> Currently I have some usbsnoop logs, devices images, lsusb output, and >> the inf file. >> >> >> >> _______________________________________________ >> linux-dvb mailing list >> linux-dvb@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> > > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
