Zoilo Gomez wrote: > Hi Marcus, > > The problems with 2031 were unfortunately never fixed. IIRC we were left > with the following problems: > 1) tuner device sometimes missing in /dev/dvb/adapterX/ on boot (app. > 20% of the boots, tested on 2 different machines) > 2) needed to tune twice in case of freq change; the first time would > almost never give a lock (but sometimes it did strangely enough) > 3) unstable signal, where signal would be lost after some time (hours); > this problem I never investigated thoroughly, because of 1) and 2) which > needed a solution first. > > So at some point I had to decide to drop 2031, then chose KNC-ONE / > DVB-C + separate CI-module, which is running very stable. > > Pity, because I would really prefer to have CI integrated into the DVB-C > card. > > My hopes are that Twinhan 1034, which Manu is currently working on, will > eventually give better results. > The 1034 is a DVB-S card. > Please let me know if you can make progress (but please CC to the > linux-dvb list as well). http://linuxtv.org/hg/v4l-dvb?f=4f65bdd94527;file=linux/drivers/media/dvb/bt8xx/dst.c;style=gitweb at line #1648, does adding a msleep(20) or something around that order help ? for your problem (2) mentioned for (1) try using dst_addons=0x20 as module parameter. You will need this patch as well (for fixing the dvb-attach). Apply this patch first http://article.gmane.org/gmane.linux.drivers.dvb/27792/match= Alongwith one of the previous patches, commenting out one line for DCT-CI cards Manu _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
